text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  £11.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  £42.00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prijs:  £13.00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  £291.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  £13.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  £12.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  £11.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  £767.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  £776.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Prijs:  £188.32
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Set 22
Calibration Set 22
ID: CALIBRATION SET 22
Prijs:  £422.00
Beknopt overzicht:  Calibration set for T-slot mounting on the machine tool table. Content see product description.
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30mm
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK80 Form A
Hollow Taper Shank HSK80 Form A
ID: D28-HSK80A-B
Prijs:  £452.32
Beknopt overzicht: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form A
Hollow Taper Shank HSK63 Form A
ID: D28-HSK63A-W
Prijs:  £282.48
Beknopt overzicht: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK80 Form A
Hollow Taper Shank HSK80 Form A
ID: D28-HSK80A-M
Prijs:  £659.12
Beknopt overzicht: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form A
Hollow Taper Shank HSK63 Form A
ID: D28-HSK63A-B
Prijs:  £235.84
Beknopt overzicht: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form A
Hollow Taper Shank HSK50 Form A
ID: D28-HSK50A-B
Prijs:  £660.00
Beknopt overzicht: 

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50-A__B
Prijs:  £206.80
Beknopt overzicht: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-W
Prijs:  £188.32
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form A
Hollow Taper Shank HSK50 Form A
ID: D28-HSK50A-M
Prijs:  £660.00
Beknopt overzicht: 

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK32 Form A
Hollow Taper Shank HSK32 Form A
ID: D28-HSK32A-B
Prijs:  £621.28
Beknopt overzicht: 

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen