text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: ART111259
Prijs:  CHF 1.400,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
ID: B841-P006-A
Prijs:  CHF 46,00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 1000 pcs.

  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6
  • Diameter (D2):  10
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
ID: CALIBRATION SET 18
Prijs:  CHF 500,00
Beknopt overzicht:  Calibration set for use on machine tools. For contents, see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: C55918029
Prijs:  CHF 492,00
Beknopt overzicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C6-B
Prijs:  CHF 860,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D16-HSK25E-B
Prijs:  CHF 436,00
Beknopt overzicht: 

Hollow taper shank HSK25 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C4-B
Prijs:  CHF 790,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C8-B
Prijs:  CHF 1.220,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-BT40-70-B
Prijs:  CHF 324,00
Beknopt overzicht: 

Taper shank JIS BT40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm /  2.75"

Op voorraad – Verzendtijd 1-2 dagen
ID: ART106194
Prijs:  CHF 550,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART107122
Prijs:  CHF 1.730,00
Beknopt overzicht:  Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=5 mm and D2=10 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Diameter (D2):  10
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART106160
Prijs:  CHF 720,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART107108
Prijs:  CHF 320,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART107111
Prijs:  CHF 210,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART106154
Prijs:  CHF 170,00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-FEMALE
Prijs:  CHF 33,00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-GUIDE480
Prijs:  CHF 262,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO8__20
Prijs:  CHF 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONEADJ
Prijs:  CHF 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-LATSML
Prijs:  CHF 39,00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen