text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  CHF 142,00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M4)
ID: FV-SLIDER
Prijs:  CHF 18,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  CHF 18,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  CHF 46,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M4)
ID: FV-CONE
Prijs:  CHF 15,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  CHF 930,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  CHF 940,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Universal Joint
ID: FX-UNI__JOINT
Prijs:  CHF 95,00
Beknopt overzicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
ID: FX-VEE
Prijs:  CHF 77,00
Beknopt overzicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Joystick for Universal Jogbox (UJB)
ID: H000115
Prijs:  CHF 164,00
Beknopt overzicht: 
3 Axis Joystick for Hexagon Universal Jogbox (UJB).
Op voorraad – Verzendtijd 1-2 dagen
Jogbox (NJB) Kit with cable, 6 m
ID: G59682700
Prijs:  CHF 1.494,00
Beknopt overzicht: 

Next Jogbox (NJB) Kit including cradle and cable (6 m).

Op voorraad – Verzendtijd 1-2 dagen
Next Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Prijs:  CHF 1.698,00
Beknopt overzicht: 

Next Jogbox (NJB) Kit including cradle and cable (15 m).

Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Prijs:  CHF 546,00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Prijs:  CHF 835,00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Prijs:  CHF 815,00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Basisplaat comptabiliteit:  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Prijs:  CHF 1.020,00
Beknopt overzicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Basisplaat comptabiliteit:  KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
Universal Kinematic Fixture Base
ID: KB-UNIVL
Prijs:  CHF 690,00
Beknopt overzicht:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Basisplaat comptabiliteit:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 400x400 mm (M8)
ID: KPT-400__400
Prijs:  CHF 1.470,00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Basisplaat comptabiliteit:  KB-300/300, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Prijs:  CHF 660,00
Beknopt overzicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Basisplaat comptabiliteit:  KPP-300/300, KPT-300/300
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Prijs:  CHF 1.900,00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Basisplaat comptabiliteit:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen