text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prijs:  60,00 €
Beknopt overzicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Lengte:  50
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  1 750,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 2-75 (P)
Target D1=15 mm retro coded No. 2-75 (P)
ID: ART110641
Prijs:  390,00 €
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro uncoded (5000 pc.) (P)
Target D1=10 mm retro uncoded (5000 pc.) (P)
ID: ART107127
Prijs:  1 750,00 €
Beknopt overzicht:  Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=10 mm and D2=13 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Diameter (D2):  13
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 2-75 (M)
Target D1=15 mm retro coded No. 2-75 (M)
ID: ART111274
Prijs:  670,00 €
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Prijs:  254,00 €
Beknopt overzicht:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Op voorraad – Verzendtijd 1-2 dagen
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prijs:  zł10,344.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  20
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Prijs:  zł10,344.00
Beknopt overzicht:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Polygon Tool Holder C4
Polygon Tool Holder C4
ID: D20-C4-B
Prijs:  zł388,331.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form E
Hollow Taper Shank HSK50 Form E
ID: D20-HSK50E-TI-B
Prijs:  zł751,664.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK50 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D20-HSK63F-B
Prijs:  570,00 €
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form A
Hollow Taper Shank HSK50 Form A
ID: D20-HSK50A-TI-B
Prijs:  1 810,00 €
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK50 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK40
Hollow Taper Shank HSK40
ID: D20-HSK40-TI-B
Prijs:  1 130,00 €
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK40 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK40 Form A
Hollow Taper Shank HSK40 Form A
ID: D20-HSK40A-B
Prijs:  459,00 €
Beknopt overzicht: 

Hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank JIS BT40
Taper Shank JIS BT40
ID: D28-BT40-A__B
Prijs:  246,00 €
Beknopt overzicht: 

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
  • Onderdeelnummer:  D28-BT40-A/B
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Single
Vee Block Single
ID: FV-VEE
Prijs:  31,00 €
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Op voorraad – Verzendtijd 1-2 dagen
Magnetic Positioning Targets D1 = 6 mm, retro (500 pc.)
Magnetic Positioning Targets D1 = 6 mm, retro (500 pc.)
ID: B841-P027-A
Prijs:  zł92,665.00
Beknopt overzicht: 

Magnetic, non-coded positioning targets for magnetic adhering on the surface of workpiece to do scanning job. Inner diameter: 6 mm, outer diameter: 10 mm. Quantity: 500 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6
  • Diameter (D2):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank JIS BT50
Taper Shank JIS BT50
ID: D28-BT50-A__B
Prijs:  zł132,317.00
Beknopt overzicht: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK50 (L = 76 mm / 2.99")
Taper Shank DIN ISO 7388 SK50 (L = 76 mm / 2.99")
ID: D20-SK50-76-B
Prijs:  zł225,413.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 76 mm / 2.99"
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  zł8,189.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen