text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  £19.36
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  £893.20
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  £902.88
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  £887.04
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
SKU: FX-CTSML
Price:  £30.80
Quick overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Stock goods
Vee Locator
Vee Locator
SKU: FV-FEMALE
Price:  £25.52
Quick overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Stock goods
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Price:  £42.24
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Stock goods
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Price:  £236.72
Quick overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
Stock goods
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Price:  £8.80
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20mm
  • Diameter:  8mm
Stock goods
Cone Adjustable (M4)
Cone Adjustable (M4)
SKU: FV-CONEADJ
Price:  £14.08
Quick overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Stock goods
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Price:  £30.80
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Stock goods
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Price:  615,00 $
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Stock goods
Spring Nut (M8)
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Price:  26,00 $
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Stock goods
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Price:  $26.00
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  10mm
  • Diameter:  8mm
Stock goods
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
SKU: FX-LATMED
Price:  zł189.00
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20mm
  • Diameter:  16mm
Stock goods
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
SKU: FX-BRONZE__KIT
Price:  zł4,356.00
Quick overview:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Stock goods
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Price:  zł40.50
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  25mm
  • Diameter:  8mm
Stock goods
Tension Post (M8)
Tension Post (M8)
SKU: FX-POST
Price:  zł112.50
Quick overview:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Schroefdraad:  M8
Stock goods
Standoff Support (M4)
Standoff Support (M4)
SKU: FV-SOSUP
Price:  zł63.00
Quick overview:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lengte:  6mm
  • Diameter:  8mm
Stock goods
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
SKU: FX-BP400__400
Price:  zł4,549.50
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Stock goods