text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue

Catalogue

mdTest_Course_031201
mdTest_Course_031201
N° : 152606
Prix:  431,00 zł
Vue d'ensemble sommaire:  Test_summary
Not Applicable
mdTest_Course_031801
mdTest_Course_031801
N° : 152627
Prix:  431,00 zł
Vue d'ensemble sommaire:  Test_summary
Not Applicable
mdtest-aravind-course-multiLanguage-01
mdtest-aravind-course-multiLanguage-01
N° : 152704
Prix:  431,00 zł
Vue d'ensemble sommaire:  Test_summary
Not Applicable
mdtest-isuru-2024-05-08-1
mdtest-isuru-2024-05-08-1
N° : 152805
Prix:  431,00 zł
Vue d'ensemble sommaire:  Test_summary
Not Applicable
Extension for 3D-FI Calibration Ball
Extension for 3D-FI Calibration Ball
N° : 3D-FI Extension 45
Prix:  437,00 zł
Vue d'ensemble sommaire:  Extension with 45° angle for calibration balls for machine tools.
En stock - Livraison sous 1 à 2 jours
M4-Stylus (SN-2-TC-1.5-L19)
M4-Stylus (SN-2-TC-1.5-L19)
N° : H00027433
Prix: 
  • Previous Part Number:  91.00-T20/2-HM-M4-SI
  • Schroefdraad:  M4
  • Kogel materiaal:  Siliciumnitride
  • Kogel diameter (D):  2mm
  • Lengte (L):  19mm
En stock - Livraison sous 1 à 2 jours
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
N° : G39031401
Prix:  3.352,00 zł
Vue d'ensemble sommaire: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
En stock - Livraison sous 1 à 2 jours
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
N° : 41.00-VE115
Prix:  2.462,00 zł
Vue d'ensemble sommaire: 

Short description Text
En stock - Livraison sous 1 à 2 jours
Taper Shank ANSI B5.50/CAT50
Taper Shank ANSI B5.50/CAT50
N° : D28-CAT50-W
Prix:  295,55 CHF
Vue d'ensemble sommaire: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
En stock - Livraison sous 1 à 2 jours
Taper Shank JIS BT50
Taper Shank JIS BT50
N° : D28-BT50-W
Prix:  309,35 CHF
Vue d'ensemble sommaire: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
En stock - Livraison sous 1 à 2 jours
Hexagon site Training - PC-DMIS advanced GD&T
Hexagon site Training - PC-DMIS advanced GD&T
N° : HN61-A008-118
Prix: 
Vue d'ensemble sommaire: 

Classroom Training for PC-DMIS Advanced Training - PC-DMIS GD&T - 2 days

Course summary/agenda:

The PC-DMIS Advanced GD&T course is targeted at individuals who have completed the PC-DMIS Level 1 course and wish to enhance their understanding of GD&T and how to implement that correctly in PC-DMIS. All GD&T types will be covered with practical examples throughout to aid learning. The course will provide a platform for trainees to create reports that follow the latest metrology standards, ensuring their workplace quality processes are based upon correct metrology data.
  • Course Level:  Level 2
Not Applicable
Customer onsite Training - Dedicated- PC-DMIS Advanced Training - PC-DMIS GD&T
Customer onsite Training - Dedicated- PC-DMIS Advanced Training - PC-DMIS GD&T
N° : HN61-A008-169
Prix: 
Vue d'ensemble sommaire: 

Classroom Training for PC-DMIS Advanced Training - PC-DMIS GD&T - 2 days

Course summary/agenda:

The PC-DMIS Advanced GD&T course is targeted at individuals who have completed the PC-DMIS Level 1 course and wish to enhance their understanding of GD&T and how to implement that correctly in PC-DMIS. All GD&T types will be covered with practical examples throughout to aid learning. The course will provide a platform for trainees to create reports that follow the latest metrology standards, ensuring their workplace quality processes are based upon correct metrology data.
  • Course Level:  Level 2
  • Datum bereik:  22/05/2025 - 31/05/2025 
  • Start Date:  22/05/2025
Not Applicable
Classroom Training - PC-DMIS Portable basic - 3 days
Classroom Training - PC-DMIS Portable basic - 3 days
N° : RE54T153-00060
Prix:  1 775,60 CHF
Vue d'ensemble sommaire: 

Target Group

New users of portable equipment with PC-DMIS, as well as those who wish to strengthen their basic knowledge in the PC-DMIS software.

Course Goals

To provide the basic knowledge required to use PC-DMIS with portable equipment.

Prerequisites

Computer literacy and basic knowledge in reading technical drawings.

Additional Information

Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
Not Applicable
Classroom Training - PC-DMIS Portable laserscanning - 1 day
Classroom Training - PC-DMIS Portable laserscanning - 1 day
N° : RE54T153-00055
Prix:  756,70 CHF
Vue d'ensemble sommaire: 

Target Group
New users of measuring arms with PC-DMIS Laser, as well as those who wish to strengthen their basic knowledge in laser scanning.
Course Goals
To provide the basic knowledge required to use laser scanning with the measuring arm in the PC-DMIS software.
Prerequisites
Computer literacy, basic knowledge in reading technical drawings, and basic knowledge of PC-DMIS Measuring Arm.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
Not Applicable
Classroom Training - Drawings Basic - 1 day
Classroom Training - Drawings Basic - 1 day
N° : RE54T153-00005
Prix:  545,10 CHF
Vue d'ensemble sommaire: 

Target Group
Individuals who need basic knowledge in reading technical drawings.
Course Goals
To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 
Not Applicable
Classroom Training - Workshop measurement - 2 days
Classroom Training - Workshop measurement - 2 days
N° : RE54T153-00007
Prix:  867,10 CHF
Vue d'ensemble sommaire: 

Target Group
Anyone who needs basic knowledge in measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals
To provide basic knowledge to build upon in the field of workshop metrology.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 
Not Applicable
Classroom Training - Workshop measurement and drawings, basic - 3 days
Classroom Training - Workshop measurement and drawings, basic - 3 days
N° : RE54T153-00004
Prix:  1 301,80 CHF
Vue d'ensemble sommaire: 

Target Group
Anyone who needs basic knowledge in reading technical drawings and measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals
To provide basic knowledge to build upon in the areas of reading technical drawings and workshop metrology.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 

 
Not Applicable
Blended Training, web & Classroom - GD&T CMM - 1,5 + 3 days
Blended Training, web & Classroom - GD&T CMM - 1,5 + 3 days
N° : RE54T153-00033
Prix:  2 067,70 CHF
Vue d'ensemble sommaire: 

Target Group
Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals
To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites
Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information
To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
Not Applicable
Heavy-duty 5 Pallet Storage Solution 500 x 750 mm
Heavy-duty 5 Pallet Storage Solution 500 x 750 mm
N° : GB0119-2003
Prix: 
Vue d'ensemble sommaire: 

The heavy-duty 5 Pallet Storage bench is purpose-built to work seamlessly with the transport trolley and 500 x 750 mm baseplates.
  • Pallet System Compatibility:  Heavy-duty Manual Pallet System 500 x 750mm (GB0119-2000)
  • Trolley Compatibility:  Heavy-duty Trolley System 500 x 750 mm (GB0119-2001)
Not Applicable
Classroom Training - PC-DMIS CMM basic - 4 days
Classroom Training - PC-DMIS CMM basic - 4 days
N° : RE54T153-00010
Prix:  2 007,90 CHF
Vue d'ensemble sommaire: 

Target Group

Measuring machine operators and measuring machine programmers, as well as those who wish to strengthen their basic knowledge in the PC-DMIS software.

Course Goals

To provide the basic knowledge required to start using PC-DMIS.

Prerequisites

Computer literacy and basic knowledge in reading technical drawings.

Additional Information

Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
Not Applicable