text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Target D1=5 mm retro coded No. 151-500 (P)
Target D1=5 mm retro coded No. 151-500 (P)
ID: ART111173
Prijs:  €590.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5mm
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 2-150 (M)
Target D1=5 mm retro coded No. 2-150 (M)
ID: ART111037
Prijs:  €670.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro coded No. 76-150 (M)
Target D1=10 mm retro coded No. 76-150 (M)
ID: ART111269
Prijs:  €520.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro coded No. 151-500 (M)
Target D1=10 mm retro coded No. 151-500 (M)
ID: ART111271
Prijs:  €1,330.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 76-150 (M)
Target D1=15 mm retro coded No. 76-150 (M)
ID: ART111275
Prijs:  €670.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 2-75 (M)
Target D1=15 mm retro coded No. 2-75 (M)
ID: ART111274
Prijs:  €670.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 151-500 (M)
Target D1=5 mm retro coded No. 151-500 (M)
ID: ART111259
Prijs:  €1,330.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Calibration Set 22
Calibration Set 22
ID: CALIBRATION SET 22
Prijs:  €510.00
Beknopt overzicht:  Calibration set for T-slot mounting on the machine tool table. Content see product description.
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30mm
Op voorraad – Verzendtijd 1-2 dagen
Positioning Targets D1 = 6 mm, retro (1000 pc.)
Positioning Targets D1 = 6 mm, retro (1000 pc.)
ID: B841-P006-A
Prijs:  €46.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 1000 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6mm
  • Diameter (D2):  10mm
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Magnetic Positioning Targets D1 = 6 mm, retro (500 pc.)
Magnetic Positioning Targets D1 = 6 mm, retro (500 pc.)
ID: B841-P027-A
Prijs:  €189.00
Beknopt overzicht: 

Magnetic, non-coded positioning targets for magnetic adhering on the surface of workpiece to do scanning job. Inner diameter: 6 mm, outer diameter: 10 mm. Quantity: 500 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6mm
  • Diameter (D2):  10mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Coded Targets 10 x 10 cm, retro, No. 31-1050 (2-Pack)
Coded Targets 10 x 10 cm, retro, No. 31-1050 (2-Pack)
ID: B844-P003-A
Prijs:  €379.00
Beknopt overzicht: 

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm.
  • Codering:  Coded
  • Reflectortype:  Retroreflecterend
  • Bevestiging:  Afneembaar (R)
  • Systeem Compatibiliteit:  MARVELSCAN
Op voorraad – Verzendtijd 1-2 dagen
Positioning Targets ID 3 mm, self-adhesive (1000 pcs)
Positioning Targets ID 3 mm, self-adhesive (1000 pcs)
ID: B841-P007-A
Prijs:  €46.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1000 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  3mm
  • Diameter (D2):  7mm
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
ID: D28-HSK100A-M
Prijs:  €425.00
Beknopt overzicht: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-B
Prijs:  €291.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Cylindrical Shaft for Tool Holder
Cylindrical Shaft for Tool Holder
ID: D28-D32-L100-B
Prijs:  €369.00
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D28-HSK63F-B
Prijs:  €369.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form E
Hollow Taper Shank HSK50 Form E
ID: D28-HSK50E-M
Prijs:  €481.00
Beknopt overzicht: 

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
ID: D28-HSK100A-W
Prijs:  €380.00
Beknopt overzicht: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Modular Adapter D20/D28
Modular Adapter D20/D28
ID: D20-MO-B
Prijs:  €90.00
Beknopt overzicht: 

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50
Hollow Taper Shank HSK50
ID: D20-HSK50-TI-B
Prijs:  €1,220.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK50 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen