Bewerkingsmachine

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

Open-end wrench AF 4 mm for easy and safe stylus replacement on the m&h measuring unit PP21.00 and m&h touch probes IRP25.50, RWP20.50, IRP32.00 and TP‑R‑400.

Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 5 m / 16.4'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 1 m / 3.3'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 3 m / 9.8'

Adapter cable  with M12/F08 and M23/M12 plugs. Length: 3 m / 9.8'

Horizontal mounting holder for installing the radio-wave receiver RWR95.40 inside the machining area.

Dial gauge with housing Ø44 mm display with reading 0.25 - 0 - 0.25 mm. Protection class IP65. Resolution: 0.001 mm / .00005"  / Measuring range: ± 0.25 mm / ± .010"

Taper shank JIS BT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Taper shank CAT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Adapter from D11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D11 connection.

Taper shank SK40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 50 mm / 1.97"

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 100 mm / 3.94"

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 10 m / 32.8'