text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: B843-P009-A
Prijs:  zł430.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 16 mm,  outer diameter: 25 mm. Quantity: 300 pcs.

  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  16
  • Diameter (D2):  25
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
ID: A841-P003-B
Prijs:  zł976.00
Beknopt overzicht: 

USB cable for use with the handheld 3D scanners ATLASCAN Max and MARVELSCAN. Length: 4 m

  • Systeem Compatibiliteit:  ATLASCAN Max, MARVELSCAN
  • Aansluiting:  USB 3.0
  • Lengte:  4
Op voorraad – Verzendtijd 1-2 dagen
ID: B841-P027-A
Prijs:  zł813.00
Beknopt overzicht: 

Magnetic, non-coded positioning targets for magnetic adhering on the surface of workpiece to do scanning job. Inner diameter: 6 mm, outer diameter: 10 mm. Quantity: 500 pcs.

  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6
  • Diameter (D2):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
ID: B844-P003-A
Prijs:  zł1,630.00
Beknopt overzicht: 

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm.

  • Codering:  Coded
  • Reflectortype:  Retroreflecterend
  • Bevestiging:  Afneembaar (R)
  • Systeem Compatibiliteit:  MARVELSCAN
Op voorraad – Verzendtijd 1-2 dagen
ID: B841-P007-A
Prijs:  zł198.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1000 pcs.

  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  3
  • Diameter (D2):  7
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
ID: AZ-04__17
Prijs:  zł1,075.00
Beknopt overzicht: 

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with SK/CAT40 taper shank.

Op voorraad – Verzendtijd 1-2 dagen
ID: AZ-02
Prijs:  zł1,075.00
Beknopt overzicht: 

Pull stud with integrated mechanism for activating Hexagon machine tool probes equipped with SK40 or CAT40 taper shanks.

Op voorraad – Verzendtijd 1-2 dagen
ID: AZ-06
Prijs:  zł1,075.00
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__400
Prijs:  zł3,999.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CTSML
Prijs:  zł142.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-FEMALE
Prijs:  zł142.00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-VEETWIN
Prijs:  zł202.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-GUIDE480
Prijs:  zł1,127.00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO8__20
Prijs:  zł43.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONEADJ
Prijs:  zł95.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CTMED
Prijs:  zł142.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__300
Prijs:  zł3,354.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-M8SPRGNUT
Prijs:  zł142.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-LATSML
Prijs:  zł168.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-LATMED
Prijs:  zł232.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen