text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  CHF 22,00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  CHF 19,00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  CHF 52,00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prijs:  CHF 19,00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  CHF 600,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  CHF 18,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  CHF 18,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  CHF 46,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  CHF 15,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  CHF 930,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  CHF 940,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50-A__B
Prijs:  CHF 246,00
Beknopt overzicht: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Op voorraad
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-W
Prijs:  CHF 269,00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad
RA7 USB-Cable with Hub (L = 5 m)
RA7 USB-Cable with Hub (L = 5 m)
ID: H00000707
Prijs:  CHF 145,00
Beknopt overzicht:  Powered USB cable, length 5 m. For use with all Series 7 Absolute Arm models.
  • Compatibiliteit:  Absolute Arm RA7, Absolute Arm MultiGage
  • Lengte:  5
  • Stekkertype:  Hirose
  • USB / LAN:  USB
Langere levertijd
RA7 USB/Ethernet Cable for RSx / HP-L Scanner (L = 5 m)
RA7 USB/Ethernet Cable for RSx / HP-L Scanner (L = 5 m)
ID: H00000708
Prijs:  CHF 352,00
Beknopt overzicht:  Combined powered USB-Ethernet cable, length 5 m. For use with Series 7 Absolute Arm models configured for laser scanning.
  • Compatibiliteit:  Absolute Arm RA7
  • Lengte:  5
  • Stekkertype:  Hirose
  • USB / LAN:  USB / LAN
  • Scannercompatibiliteit:  RS1, RS2, RS3, RS4, HP-L-8.9, HP-L-20.8
Op voorraad
Mounting Ring alone
Mounting Ring alone
ID: H00004220
Prijs:  CHF 264,00
Beknopt overzicht:  Standard mounting ring. For use with all Absolute Arm models.
  • Ring Diameter:  108
  • Materiaal:  Roestvast staal
Op voorraad
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prijs:  CHF 10,00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Schroefdraad:  M8
Op voorraad
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prijs:  CHF 60,00
Beknopt overzicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Grootte:  120 x 45 x 12 mm
Op voorraad
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prijs:  CHF 1.200,00
Beknopt overzicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad
Support Stop
Support Stop
ID: FX-SUP__STOP
Prijs:  CHF 87,00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Schroefdraad:  M8
Op voorraad