text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prijs:  CHF1,520.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Pillar 30x30x100mm
ID: FX-PR30__100
Prijs:  CHF40.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Grootte:  30 x 30 x 100
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prijs:  CHF1,900.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prijs:  CHF19.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
ID: FV-CNRBRKT
Prijs:  CHF52.00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Universal Clamp (M8)
ID: FX-CLAMP
Prijs:  CHF129.00
Beknopt overzicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Single
ID: FV-VEE
Prijs:  CHF32.00
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Op voorraad – Verzendtijd 1-2 dagen
Tension Post (M4)
ID: FV-POST
Prijs:  CHF19.00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  CHF475.00
Beknopt overzicht:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
Spring Plunger
ID: FX-PLUNGER
Prijs:  CHF95.00
Beknopt overzicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Prijs:  CHF63.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20
  • Diameter:  20
Op voorraad – Verzendtijd 1-2 dagen
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  CHF142.00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M4)
ID: FV-SLIDER
Prijs:  CHF18.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  CHF18.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  CHF46.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Prijs:  CHF275.00
Beknopt overzicht:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M4)
ID: FV-CONE
Prijs:  CHF15.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Slider Block (M8)
ID: FX-SLIDER
Prijs:  CHF26.00
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Coded Targets 10 x 10 cm, retro, No. 31-1050 (2-Pack)
ID: B844-P003-A
Prijs:  CHF379.00
Beknopt overzicht: 

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm.

  • Codering:  Coded
  • Reflectortype:  Retroreflecterend
  • Bevestiging:  Afneembaar (R)
  • Systeem Compatibiliteit:  MARVELSCAN
Op voorraad – Verzendtijd 1-2 dagen
Positioning Targets ID 3 mm, self-adhesive (1000 pcs)
ID: B841-P007-A
Prijs:  CHF46.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1000 pcs.

  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  3
  • Diameter (D2):  7
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen