text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prijs:  CHF 18,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/30
  • Lengte:  30 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prijs:  CHF 95,00
Beknopt overzicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Onderdeelnummer:  FX-UNI/JOINT
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
Vee Locator
ID: FX-VEE
Prijs:  CHF 77,00
Beknopt overzicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Onderdeelnummer:  FX-VEE
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prijs:  CHF 22,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Onderdeelnummer:  FX-SO/MAG
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prijs:  CHF 18,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/30
  • Lengte:  30 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prijs:  CHF 22,00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Onderdeelnummer:  FX-SO/PIN
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prijs:  CHF 26,00
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Onderdeelnummer:  FX-SLIDER
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Prijs:  CHF 19,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/50
  • Lengte:  50 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prijs:  CHF 19,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/50
  • Lengte:  50 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Prijs:  CHF 139,00
Beknopt overzicht:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Onderdeelnummer:  FX-TOG
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prijs:  CHF 5.756,00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd > 25 dagen
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prijs:  CHF 8.550,00
Beknopt overzicht: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Onderdeelnummer:  GB0122-1000
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd > 25 dagen
Jogbox (NJB) Kit with cable, 4 m
Jogbox (NJB) Kit with cable, 4 m
ID: G59682600
Prijs:  CHF 1.478,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (4 m).
  • Onderdeelnummer:  G59682600
Levertijd > 25 dagen
Jogbox (NJB) Kit with cable, 6 m
Jogbox (NJB) Kit with cable, 6 m
ID: G59682700
Prijs:  CHF 1.494,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (6 m).
  • Onderdeelnummer:  G59682700
Op voorraad - verzending 1-2 dagen
Jogbox (NJB) Kit with cable, 15 m
Jogbox (NJB) Kit with cable, 15 m
ID: G59682800
Prijs:  CHF 1.698,00
Beknopt overzicht: 

Jogbox (NJB) Kit including cradle and cable (15 m).
  • Onderdeelnummer:  G59682800
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H=144-193.1-214.5 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H=144-193.1-214.5 mm)
ID: G39031501
Prijs:  CHF 1.276,00
Beknopt overzicht: 

Calibration sphere set for coordinate measuring machines (CMMs). The set includes a certified ceramic calibration sphere (Ø 25 mm) and a robust stand that allows precise positioning of the sphere at 0°, 45°, and 90°. With M8 mounting for secure machine fixing.
  • Onderdeelnummer:  G39031501
  • Materiaal van de bol:  Keramiek
  • Kogel Diameter (D):  25
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
Ceramic Calibration Sphere Kit (D = 25 mm, H = 170 mm)
ID: G39032100
Prijs:  CHF 796,00
Beknopt overzicht: 

Calibration sphere set, included a certified calibration sphere (Ø25 mm) made of ceramic and an extension made of high-strength steel (120 mm). The set has a total height of 170 mm and M8 machine fixing for use with CMMs.
  • Onderdeelnummer:  G39032100
  • Materiaal van de bol:  Keramiek
  • Diameter van de bol:  25
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  CHF 1.004,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  CHF 279,00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Onderdeelnummer:  FV-GUIDE480
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  CHF 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FV-SO8/20
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen