text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

155 product(en) gevonden

ID: GB-0122-1000

Prijs: zł2,801,500.00

Beknopt overzicht: SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.

Compatibiliteit: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: zł2,376.00

Beknopt overzicht: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Compatibiliteit: HP-S-X1 Stylus Clampings
Diameter: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: zł2,035.00

Beknopt overzicht: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Compatibiliteit: HP-S-X3 Stylus Clampings
Diameter: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Prijs: zł3,352.00

Beknopt overzicht:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Onderdeelnummer: 1234567890734343

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prijs: zł3,888.00

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prijs: zł138.00

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: zł199.00

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: zł43.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lengte: 20mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prijs: zł73.00

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lengte: 20mm
Diameter: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prijs: zł354.00

Beknopt overzicht: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Prijs: zł4,925.00

Beknopt overzicht: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Schroefdraad: M4
Toepassing: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Prijs: zł43.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lengte: 15mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Cap Screw Set M8 (L = 16 mm)

ID: FX-CAPM8__16

Prijs: zł78.00

Beknopt overzicht: Cap screws are used to mount Swift-Fix components on the base plate.

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Cap Screw Set M8 (L = 20 mm)

ID: FX-CAPM8__20

Prijs: zł78.00

Beknopt overzicht: Cap screws are used to mount Swift-Fix components on the base plate.

Schroefdraad: M8

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Gold Kit

ID: FX-GOLD__KIT

Prijs: zł10,670.00

Beknopt overzicht: With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Schroefdraad: M8
Toepassing: CMM, Draagbare meetarm

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Support Kit

ID: FX-KINKIT

Prijs: zł1,097.00

Beknopt overzicht: The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 16 mm / L = 20 mm)

ID: FX-SO__MAG

Prijs: zł91.00

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.