Bewerkingsmachine

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'

Adapter cable with M12/F12 and M12/M08 plugs. Length: 0.2 m / 0.66'

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT30 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

Thermal insulated hollow taper shank HSK50 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK40 Form F for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Cylindrical tool holder for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool. Shank length: 70 mm

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

Hollow taper shank HSK32 for use with of Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.