text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Hollow Taper Shank HSK50 Form A
Hollow Taper Shank HSK50 Form A
ID: D28-HSK50A-B
Prijs:  €780.00
Beknopt overzicht: 

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50-A__B
Prijs:  €246.00
Beknopt overzicht: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-W
Prijs:  €224.00
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form A
Hollow Taper Shank HSK50 Form A
ID: D28-HSK50A-M
Prijs:  €780.00
Beknopt overzicht: 

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-W
Prijs:  €269.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK32 Form A
Hollow Taper Shank HSK32 Form A
ID: D28-HSK32A-B
Prijs:  €740.00
Beknopt overzicht: 

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK30 AZ-01
Taper Shank DIN ISO 7388 SK30 AZ-01
ID: D28-SK30-A
Prijs:  €380.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  €21.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro uncoded (5000 pc.) (P)
Target D1=5 mm retro uncoded (5000 pc.) (P)
ID: ART107122
Prijs:  €1,640.00
Beknopt overzicht:  Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=5 mm and D2=10 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5mm
  • Diameter (D2):  10mm
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro coded No. 151-500 (P)
Target D1=10 mm retro coded No. 151-500 (P)
ID: ART106160
Prijs:  €680.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10mm
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm white coded No. 151-500 (M)
Target D1=5 mm white coded No. 151-500 (M)
ID: ART109471
Prijs:  €660.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  5mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 2-150 (P)
Target D1=5 mm retro coded No. 2-150 (P)
ID: ART107108
Prijs:  €300.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5mm
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm white uncoded (1000 pc.) (R)
Target D1=10 mm white uncoded (1000 pc.) (R)
ID: ART107145
Prijs:  €96.00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=10 mm and D2=13 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  10mm
  • Diameter (D2):  13mm
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro coded No. 76-150 (M)
Target D1=10 mm retro coded No. 76-150 (M)
ID: ART111269
Prijs:  €520.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10mm
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Polygon Tool Holder C6
Polygon Tool Holder C6
ID: D28-C6-W
Prijs:  €630.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  €32.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  €750.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  €25.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  100mm
  • Diameter:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  €32.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  €52.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20mm
  • Diameter:  16mm
Op voorraad – Verzendtijd 1-2 dagen