text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
T-Nut 14 mm
ID: 4274
Prijs:  CHF7.00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiaal:  Tempered Steel
  • Internal Thread:  M12
  • Nominale T-groefmaat:  14
Op voorraad – Verzendtijd 1-2 dagen
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  CHF49.00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diameter:  25
  • Lengte:  75
  • Materiaal:  Roestvast staal
Op voorraad – Verzendtijd 1-2 dagen
Battery (3 V / CR2032)
ID: 5309
Prijs:  CHF4.00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Grootte:  9 V Block
  • Voltage:  9
  • Capacity:  1200
  • Compatibiliteit:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prijs:  CHF356.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiaal:  Koolstofvezel
  • Lengte:  200
  • Diameter:  25
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prijs:  CHF486.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lengte:  150
  • Diameter:  25
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 22 mm
ID: 4411
Prijs:  CHF27.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 12 mm
ID: 4418
Prijs:  CHF6.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 18 mm
ID: 4431
Prijs:  CHF15.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Storage Box
ID: 4301
Prijs:  CHF34.00
Beknopt overzicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 4 mm / D = 10 mm)
ID: 4420
Prijs:  CHF241.00
Beknopt overzicht:  #N/A
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE300
Prijs:  CHF520.00
Beknopt overzicht:  Extension (300 mm) made of carbon for measuring units on machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (L = 340 mm / 13.39")
ID: 41.00-VE340
Prijs:  CHF580.00
Beknopt overzicht: 

Short description Text

Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prijs:  CHF570.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-AB190/200F
  • Schroefdraad:  M4
  • Previous Part Number:  FV-AB180/200F
Op voorraad – Verzendtijd 1-2 dagen
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  CHF22.00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  CHF600.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  CHF930.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  CHF940.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Prijs:  CHF224.00
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

  • Onderdeelnummer:  D28-SK__CAT40-A/B
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form E
ID: D28-HSK63E-B
Prijs:  CHF380.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form A
ID: D28-HSK63A-M
Prijs:  CHF369.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen