text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: 41.00-VE340
Prijs:  zł2,494.00
Beknopt overzicht: 

Short description Text

Op voorraad – Verzendtijd 1-2 dagen
ID: 2675
Prijs:  zł1,445.00
Beknopt overzicht:  Calibration sphere (D = 25 mm) made of tungsten carbide with external M12 thread for use on machine tools.
  • Outside Thread:  M12
  • Diameter:  25
  • Materiaal:  Wolfraamcarbide
Op voorraad – Verzendtijd 1-2 dagen
ID: 25.50-TB
Prijs:  zł245.00
Beknopt overzicht:  Tool kit for installation and maintenance of the machine tool touch probes IRP25.50 and RWP20.50. Tool box contents see description.
  • Compatibiliteit:  IRP25.50, RWP20.50
Op voorraad – Verzendtijd 1-2 dagen
ID: 21.00-VE50
Prijs:  zł774.00
Beknopt overzicht:  Extension made of stainless steel, Ø25 mm, length 50 mm. Used to extend the length of measuring units on machine tools.
  • Materiaal:  Roestvast staal
  • Lengte:  50
  • Diameter:  25
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
ID: 2951
Prijs:  zł30.00
Beknopt overzicht:  C-Spanner for the exchange of measuring units on probes for machine tools.
  • Materiaal:  Tempered Steel
  • Lengte:  136
Op voorraad – Verzendtijd 1-2 dagen
ID: 3079
Prijs:  zł890.00
Beknopt overzicht:  Dial gauge with housing Ø40 mm, measuring range 0.2 mm, analogue display with reading in mm. For use with measuring systems on machine tools.
  • Measurement Technology:  Analogue
  • Measuring Unit:  mm
  • Meetbereik:  0.2 mm
  • Reading:  0.002 mm
  • Kogel diameter:  2
Op voorraad – Verzendtijd 1-2 dagen
ID: 0885
Prijs:  zł56.00
Beknopt overzicht:  Mounting pin for the safe mounting of styli on measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
ID: 21.00-VE30
Prijs:  zł701.00
Beknopt overzicht:  Extension (30 mm) made of stainless steel for measuring units on machine tools.
Op voorraad – Verzendtijd 1-2 dagen
ID: 91.40-ST15-X112-DUO
Prijs:  zł869.00
Beknopt overzicht: 

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain iTNC 530 HSCI and TNC 620, 640 controls, control input X112. Shielded cable with M12/F08 and DSUB HD/M15 plug. Length: 15 m (49.2')

Op voorraad – Verzendtijd 1-2 dagen
ID: 95.51-M
Prijs:  zł305.00
Beknopt overzicht: 

Short description Text

Op voorraad – Verzendtijd 1-2 dagen
ID: 5209
Prijs:  zł430.00
Beknopt overzicht:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diameter:  5
  • Lengte:  120
  • Toepassing:  Laser Tool Setter Calibration
  • Materiaal:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
ID: 5677
Prijs:  zł52.00
Beknopt overzicht:  Battery (9 V / 1200 mAh / Lithium) for use in measurement devices for machine tools.
  • Grootte:  9 V Block
  • Voltage:  9
  • Capacity:  1200
  • Compatibiliteit:  IRP25.50, RWP20.50
Op voorraad – Verzendtijd 1-2 dagen
ID: 5682
Prijs:  zł490.00
Beknopt overzicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
  • Grootte:  390 x 310 x 147 mm
  • Materiaal:  Plastics
  • Lengte:  10
Op voorraad – Verzendtijd 1-2 dagen
ID: 5248
Prijs:  zł211.00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diameter:  25
  • Lengte:  75
  • Materiaal:  Roestvast staal
Op voorraad – Verzendtijd 1-2 dagen
ID: 5309
Prijs:  zł17.00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Grootte:  9 V Block
  • Voltage:  9
  • Capacity:  1200
  • Compatibiliteit:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
ID: 4431
Prijs:  zł65.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
ID: 5736
Prijs:  zł133.00
Beknopt overzicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
ID: 5453
Prijs:  zł56.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
ID: 4420
Prijs:  zł1,036.00
Beknopt overzicht:  #N/A
Op voorraad – Verzendtijd 1-2 dagen
ID: 35.20-TB
Prijs:  zł245.00
Beknopt overzicht:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
Op voorraad – Verzendtijd 1-2 dagen