text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-SLIDER
Prijs:  € 17,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  € 17,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  € 45,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  € 15,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: C55918029
Prijs:  € 492,00
Beknopt overzicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Op voorraad – Verzendtijd 1-2 dagen
ID: 03969361
Prijs:  € 970,00
Beknopt overzicht:  TKJ extension made of aluminium and stainless steel with a length of 100 mm
  • Lengte (L):  100
  • Materiaal:  Aluminium / Staal
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969363
Prijs:  € 1.430,00
Beknopt overzicht:  TKJ extension made of aluminium and stainless steel with a length of 300 mm
  • Lengte (L):  300
  • Materiaal:  Aluminium / Staal
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969365
Prijs:  € 271,00
Beknopt overzicht:  TKJ to M8 adapter made aluminium and stainless steel with a length of 31 mm
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969362
Prijs:  € 1.170,00
Beknopt overzicht:  TKJ extension made of aluminium and stainless steel with a length of 200 mm
  • Lengte (L):  200
  • Materiaal:  Aluminium / Staal
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969394
Prijs:  € 2.740,00
Beknopt overzicht:  Set of 4 TKJ angular adapters (0°, 30°, 60°, 90°) made of aluminium and stainless steel. To be used only with HP-L-10.6.
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969366
Prijs:  € 340,00
Beknopt overzicht:  TKJ to M8 adapter made aluminium and stainless steel with a length of 140 mm
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969066
Prijs:  € 219,00
Beknopt overzicht:  M8/M8 extension made of aluminium with a length of 100 mm
  • Lengte (L):  100
  • Materiaal:  Aluminium
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__300
Prijs:  € 750,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-POST
Prijs:  € 26,00
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP400__400
Prijs:  € 1.030,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PILLAR__KIT
Prijs:  € 990,00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-HEIGHT
Prijs:  € 60,00
Beknopt overzicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Lengte:  50
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP400__600
Prijs:  € 1.750,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CAPM8__16
Prijs:  € 18,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CAPM8__20
Prijs:  € 18,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen