text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Target D1=5 mm white uncoded (1000 pc.) (M)
Target D1=5 mm white uncoded (1000 pc.) (M)
ID: ART107135
Prijs:  CHF800.00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=5 mm and D2=10 mm. For magnetic adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Diameter (D2):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=20 mm retro uncoded (5000 pc.) (P)
Target D1=20 mm retro uncoded (5000 pc.) (P)
ID: ART107130
Prijs:  CHF3,470.00
Beknopt overzicht:  Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=20 mm and D2=27 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  20
  • Diameter (D2):  27
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm white coded No. 2-150 (P)
Target D1=10 mm white coded No. 2-150 (P)
ID: ART107101
Prijs:  CHF190.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 2-75 (M)
Target D1=15 mm retro coded No. 2-75 (M)
ID: ART111274
Prijs:  CHF710.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 151-500 (M)
Target D1=5 mm retro coded No. 151-500 (M)
ID: ART111259
Prijs:  CHF1,400.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=2 mm white uncoded (1000 pc.) (R)
Target D1=2 mm white uncoded (1000 pc.) (R)
ID: ART101027
Prijs:  CHF102.00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=2 mm and D2=3.5 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  2
  • Diameter (D2):  3.5
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro uncoded (1000 pc.) (P)
Target D1=15 mm retro uncoded (1000 pc.) (P)
ID: ART107128
Prijs:  CHF830.00
Beknopt overzicht:  Set consisting of 1000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=15 mm and D2=20 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Diameter (D2):  20
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Positioning Targets D1 = 6 mm, retro (1000 pc.)
Positioning Targets D1 = 6 mm, retro (1000 pc.)
ID: B841-P006-A
Prijs:  CHF46.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 1000 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6
  • Diameter (D2):  10
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Circular Positioning Targets 7.7 x 7.7 cm (70 pc.)
Circular Positioning Targets 7.7 x 7.7 cm (70 pc.)
ID: B844-P060-01-A
Prijs:  CHF122.00
Beknopt overzicht: 

Self-adhesive, retro-reflective non-coded targets to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Size: 7.7 x 7.7 cm. Quantity: 70 pcs
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Bevestiging:  Afneembaar (R)
  • Systeem Compatibiliteit:  MARVELSCAN
Op voorraad – Verzendtijd 1-2 dagen
FREEBOX-II Lithium-Ion Battery
FREEBOX-II Lithium-Ion Battery
ID: B843-P103-A01-2A
Prijs:  CHF1,001.00
Beknopt overzicht: 

Li-Ion Battery 22.2 V / 3200 mAh
  • Systeem Compatibiliteit:  FREEBOX-II
Op voorraad – Verzendtijd 1-2 dagen
Positioning Targets ID 16 mm, self-adhesive (300 pcs)
Positioning Targets ID 16 mm, self-adhesive (300 pcs)
ID: B843-P009-A
Prijs:  CHF100.00
Beknopt overzicht: 

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 16 mm,  outer diameter: 25 mm. Quantity: 300 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  16
  • Diameter (D2):  25
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Prijs:  CHF492.00
Beknopt overzicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
Op voorraad – Verzendtijd 1-2 dagen
Polygon Tool Holder C6
Polygon Tool Holder C6
ID: D28-C6-W
Prijs:  CHF630.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Polygon Tool Holder C6
Polygon Tool Holder C6
ID: D20-C6-B
Prijs:  CHF860.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK32 Form E
Hollow Taper Shank HSK32 Form E
ID: D20-HSK32E-TI-B
Prijs:  CHF1,350.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK32 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK25 Form E
Hollow Taper Shank HSK25 Form E
ID: D16-HSK25E-B
Prijs:  CHF436.00
Beknopt overzicht: 

Hollow taper shank HSK25 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Polygon Tool Holder C4
Polygon Tool Holder C4
ID: D20-C4-B
Prijs:  CHF790.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form E
Hollow Taper Shank HSK50 Form E
ID: D20-HSK50E-TI-B
Prijs:  CHF1,530.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK50 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D20-HSK63F-B
Prijs:  CHF570.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Hollow Taper Shank HSK50 Form A
Hollow Taper Shank HSK50 Form A
ID: D20-HSK50A-TI-B
Prijs:  CHF1,810.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK50 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen