Catálogo

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 1000 pcs.

Self-adhesive, retro-reflective non-coded targets to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Size: 7.7 x 7.7 cm. Quantity: 70 pcs

Li-Ion Battery 22.2 V / 3200 mAh

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 16 mm,  outer diameter: 25 mm. Quantity: 300 pcs.

Magnetic, non-coded positioning targets for magnetic adhering on the surface of workpiece to do scanning job. Inner diameter: 6 mm, outer diameter: 10 mm. Quantity: 500 pcs.

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm.

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1000 pcs.

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Thermal insulated hollow taper shank HSK32 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK25 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Thermal insulated hollow taper shank HSK50 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK50 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.