text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  €45.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  €15.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  €900.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  €910.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50-A__B
Prijs:  €246.00
Beknopt overzicht: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-W
Prijs:  €269.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm white coded No. 151-500 (M)
Target D1=10 mm white coded No. 151-500 (M)
ID: ART109451
Prijs:  €1,110.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=20 mm white uncoded (5000 pc.) (R)
Target D1=20 mm white uncoded (5000 pc.) (R)
ID: ART107146
Prijs:  €640.00
Beknopt overzicht:  Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  20
  • Diameter (D2):  27
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm white coded No. 151-500 (P)
Target D1=5 mm white coded No. 151-500 (P)
ID: ART111281
Prijs:  €290.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 151-500 (P)
Target D1=5 mm retro coded No. 151-500 (P)
ID: ART111173
Prijs:  €590.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 151-500 (P)
Target D1=15 mm retro coded No. 151-500 (P)
ID: ART110569
Prijs:  €1,440.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm white uncoded (1000 pc.) (M)
Target D1=10 mm white uncoded (1000 pc.) (M)
ID: ART107141
Prijs:  €850.00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=10 mm and D2=13 mm. For magnetic adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Diameter (D2):  13
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm white coded No. 2-150 (M)
Target D1=10 mm white coded No. 2-150 (M)
ID: ART109450
Prijs:  €560.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm retro coded No. 2-150 (M)
Target D1=5 mm retro coded No. 2-150 (M)
ID: ART111037
Prijs:  €670.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm white coded No. 151-500 (M)
Target D1=5 mm white coded No. 151-500 (M)
ID: ART109471
Prijs:  €660.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm white uncoded (1000 pc.) (R)
Target D1=10 mm white uncoded (1000 pc.) (R)
ID: ART107145
Prijs:  €96.00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=10 mm and D2=13 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Diameter (D2):  13
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro coded No. 76-150 (M)
Target D1=10 mm retro coded No. 76-150 (M)
ID: ART111269
Prijs:  €520.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=10 mm retro coded No. 151-500 (M)
Target D1=10 mm retro coded No. 151-500 (M)
ID: ART111271
Prijs:  €1,330.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=5 mm white coded No. 2-150 (M)
Target D1=5 mm white coded No. 2-150 (M)
ID: ART109470
Prijs:  €330.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
Target D1=15 mm retro coded No. 76-150 (P)
Target D1=15 mm retro coded No. 76-150 (P)
ID: ART110642
Prijs:  €390.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen