text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-ANGSLIDER
Prijs:  € 21,00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP500__500
Prijs:  € 1.470,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP600__600
Prijs:  € 1.840,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__PIN
Prijs:  € 18,00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CNRBRKT
Prijs:  € 50,00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CLAMP
Prijs:  € 125,00
Beknopt overzicht:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200F
Prijs:  € 580,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-ARM
Prijs:  € 138,00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDER
Prijs:  € 17,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  € 17,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  € 45,00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  € 15,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: ART109450
Prijs:  € 560,00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  € 900,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  € 910,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: ART101026
Prijs:  € 96,00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=1 mm and D2=2 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  1
  • Diameter (D2):  2
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART106164
Prijs:  € 330,00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: H00031269
Prijs:  € 71,00
Beknopt overzicht: 

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem, length 10 mm. For use on machine tools. Previous part number: 91.00-T13/6-ST-M3

  • Schroefdraad:  M3
  • Kogel materiaal:  Robijn
  • Kogel diameter (D):  6
  • Lengte (L):  10
  • Schacht materiaal:  Roestvast staal
Op voorraad – Verzendtijd 1-2 dagen
ID: H00031271
Prijs:  € 92,00
Beknopt overzicht: 

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem, length 6 mm. For use on machine tools. Previous part number: 91.00-T9/6-ST-M3

  • Previous Part Number:  91.00-T9/6-ST-M3
Op voorraad – Verzendtijd 1-2 dagen
ID: H00031268
Prijs:  € 103,00
Beknopt overzicht: 

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem, length 22 mm. For use on machine tools. Previous part number: 91.00-T25/6-ST-M3

  • Previous Part Number:  91.00-T25/6-ST-M3
  • Schroefdraad:  M3
  • Kogel materiaal:  Robijn
  • Kogel diameter (D):  6
  • Lengte (L):  22
Op voorraad – Verzendtijd 1-2 dagen