Bewerkingsmachine

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 5 m / 16.4'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'

Extension cable for Hexagon sensor cables with M12/F12 plugs. Length: 10 m / 32.8'

Extension cable for Hexagon sensor cables with M12/F12 plugs. Length: 50 m / 164'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 30 m / 98.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'

Adapter cable with M12/F12 and M12/M08 plugs. Length: 0.2 m / 0.66'

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK40 Form E for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702)

Tool kit for installation and maintenance of Laser Scanner m&h LS-R-4.8. Tool box contents see description.

Thermal insulated hollow taper shank HSK63 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK40 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Dial gauge with housing Ø44 mm display with reading 0.25 - 0 - 0.25 mm. Protection class IP65. Resolution: 0.001 mm / .00005"  / Measuring range: ± 0.25 mm / ± .010"