text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
HA-M-200 Probe Extension M8 (L = 200 mm)
ID: 03969067
Prijs:  zł940.00
Beknopt overzicht:  M8/M8 extension made of aluminium with a length of 200 mm
  • Lengte (L):  200
  • Materiaal:  Aluminium
Op voorraad – Verzendtijd 1-2 dagen
HA-M-50 Probe Extension M8 (L = 50 mm)
ID: 03969065
Prijs:  zł972.00
Beknopt overzicht:  M8/M8 extension made of aluminium with a length of 50 mm
  • Lengte (L):  50
  • Materiaal:  Aluminium
Op voorraad – Verzendtijd 1-2 dagen
HA-M Probe Extension Kit M8
ID: 03969077
Prijs:  zł3,268.00
Beknopt overzicht:  Kit of three M8 Extensions (50 mm, 100 mm and 200 mm) made of aluminium
Op voorraad – Verzendtijd 1-2 dagen
HA-M-100 Probe Extension M8 (L = 100 mm)
ID: 03969066
Prijs:  zł1,131.00
Beknopt overzicht:  M8/M8 extension made of aluminium with a length of 100 mm
  • Lengte (L):  100
  • Materiaal:  Aluminium
Op voorraad – Verzendtijd 1-2 dagen
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Prijs:  zł744.00
Beknopt overzicht:  110 mm support pillar for a total height of 200 mm
  • Lengte:  110
  • Diameter:  19.5
Op voorraad – Verzendtijd 1-2 dagen
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Prijs:  zł744.00
Beknopt overzicht:  160 mm support pillar for a total height of 250 mm
  • Lengte:  160
  • Diameter:  19.5
Op voorraad – Verzendtijd 1-2 dagen
Safety Pin for HR-MP Rack
ID: 03969488
Prijs:  zł224.00
Beknopt overzicht:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Lengte:  22
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Prijs:  zł744.00
Beknopt overzicht:  60 mm support pillar for a total height of 150 mm.
  • Lengte:  60
  • Diameter:  19.5
Op voorraad – Verzendtijd 1-2 dagen
Cleaning Putty
ID: 03969650
Prijs:  zł77.00
Beknopt overzicht:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
Op voorraad – Verzendtijd 1-2 dagen
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Prijs:  zł2,116.00
Beknopt overzicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  zł215.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Thumb Screw M8
ID: FX-THUMB
Prijs:  zł43.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  zł77.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  zł361.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  zł112.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  100
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  zł142.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Prijs:  zł258.00
Beknopt overzicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Grootte:  120 x 45 x 12 mm
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prijs:  zł5,160.00
Beknopt overzicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
Support Stop
ID: FX-SUP__STOP
Prijs:  zł374.00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  zł232.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen