Katalógus

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Self-adhesive, retro-reflective non-coded targets to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Size: 7.7 x 7.7 cm. Quantity: 70 pcs

Li-Ion Battery 22.2 V / 3200 mAh

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 16 mm,  outer diameter: 25 mm. Quantity: 300 pcs.

Magnetic, non-coded positioning targets for magnetic adhering on the surface of workpiece to do scanning job. Inner diameter: 6 mm, outer diameter: 10 mm. Quantity: 500 pcs.

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm.

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1000 pcs.

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.