text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: KPT-300__300
Prijs:  zł388,331.00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Basisplaat comptabiliteit:  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-THUMB
Prijs:  zł4,741.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-UNI__JOINT
Prijs:  zł45,255.00
Beknopt overzicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__400
Prijs:  zł442,206.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-MALE
Prijs:  zł11,206.00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PR30__150
Prijs:  zł20,688.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Grootte:  30 x 30 x 150mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO8__20
Prijs:  zł4,741.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CTSML
Prijs:  zł15,516.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-STARTERKIT
Prijs:  zł560,300.00
Beknopt overzicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-POST
Prijs:  zł12,930.00
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-LATSML
Prijs:  zł18,533.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  10mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-VEETWIN
Prijs:  zł22,412.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO20__30
Prijs:  zł8,189.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  30mm
  • Diameter:  20mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SOSUP
Prijs:  zł8,189.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lengte:  6mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
ID: KB-400__400
Prijs:  zł486,599.00
Beknopt overzicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Basisplaat comptabiliteit:  KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO__SUPP
Prijs:  zł10,344.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lengte:  10mm
  • Diameter:  15mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200P
Prijs:  zł265,496.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO16__100
Prijs:  zł12,499.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  100mm
  • Diameter:  16mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-VEE
Prijs:  zł37,066.00
Beknopt overzicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDE
Prijs:  zł199,984.00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen