text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  €1,008.00
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
In giacenza - Spedizione in 1-2 giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  €29.00
Breve panoramica:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  €48.00
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  €269.00
Breve panoramica:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  €10.00
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  €16.00
Breve panoramica:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prezzo:  €10.00
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  25mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prezzo:  €16.00
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lengte:  6mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prezzo:  €1,153.00
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.726,00 €
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
In giacenza - Spedizione in 1-2 giorni
Centering Pin
Centering Pin
ID: FV-MALE
Prezzo:  20,00 CHF
Breve panoramica:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Schroefdraad:  M4
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  1.453,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Prezzo:  1.821,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  13,00 CHF
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  49,00 CHF
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  83,00 CHF
Breve panoramica:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  15,00 CHF
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  14,00 CHF
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  890,00 CHF
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  900,00 CHF
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
In giacenza - Spedizione in 1-2 giorni