text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

HP-S-X1S Stylus Clamping (1x M3)
HP-S-X1S Stylus Clamping (1x M3)
ID: M00-694-206-000
Prijs:  CHF 307,00
Beknopt overzicht:  Aluminium / Dispal® stylus clamping for scanning sensor HP-S-X1S (1x M3).
  • Bijbehorende Taster:  HP-S-X1S
  • Vrouwelijke schroefdraad (C):  M3
  • Materiaal:  Aluminium / Dispal®
  • Lengte (L):  24.3
In Stock
M5-Stylus (DC-5-TC-3.5-L80)
M5-Stylus (DC-5-TC-3.5-L80)
ID: M00-694-189-000
Prijs:  CHF 890,00
Beknopt overzicht:  Straight stylus with M5 thread, diamond coated sphere Ø5 mm, tungsten carbide stem Ø3.5 mm, length 80 mm. For use on coordinate measuring machines (CMM).
  • Schroefdraad:  M5
  • Kogel materiaal:  Diamantcoating
  • Kogel diameter (D):  5
  • Lengte (L):  80
  • Schacht materiaal:  Wolfraamcarbide
In Stock
M5-Stylus (SN-4-TC-2.5-L80)
M5-Stylus (SN-4-TC-2.5-L80)
ID: M00-694-133-000
Prijs:  CHF 111,00
Beknopt overzicht:  Straight stylus with M5 thread, silicon nitride ball Ø4 mm, tungsten carbide stem Ø2.5 mm, length 80 mm. For use on coordinate measuring machines (CMM).
  • Schroefdraad:  M5
  • Kogel materiaal:  Siliciumnitride
  • Kogel diameter (D):  4
  • Kwaliteit Kogel:  G5
  • Lengte (L):  80
In Stock
M5-Stylus (DS-3-TC-2-L30)
M5-Stylus (DS-3-TC-2-L30)
ID: M00-694-194-000
Prijs:  CHF 1.120,00
Beknopt overzicht:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on coordinate measuring machines (CMM).
  • Schroefdraad:  M5
  • Kogel materiaal:  Diamant
  • Kogel diameter (D):  3
  • Lengte (L):  30
  • Schacht materiaal:  Wolfraamcarbide
Out of stock
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
ID: M00-694-190-000
Prijs:  CHF 1.120,00
Beknopt overzicht:  Straight stylus with Ø2 mm, diamond sphere Ø1 mm, tapered tungsten carbide stem Ø0.8/2 mm, length 22 mm. For use on coordinate measuring machines (CMM).
  • Schroefdraad:  D2
  • Kogel materiaal:  Diamant
  • Kogel diameter (D):  1
  • Kwaliteit Kogel:  G10
  • Lengte (L):  22
Out of stock
Red-Ring Reflector (RRR) 7/8", 5-Pack
Red-Ring Reflector (RRR) 7/8", 5-Pack
ID: 576313
Prijs:  CHF 8.706,00
Beknopt overzicht:  Red-Ring Reflector (RRR) 7/8", 5-pack
  • Grootte:  7/8"
  • Straal (mm):  11.1125
Out of stock
QUINDOS Test Item
QUINDOS Test Item
ID: Quindos-1
Prijs:  CHF 3.450,00
Beknopt overzicht:  QUINDOS is an advanced metrology software for complex geometries such as gears, blades and other components with challenging features.
  • Type licentie:  Licentie voor één gebruiker
  • Vereist:  Zie het tabblad softwarevereisten
  • Prijs:  Per licentie
plp.search.facet.availability.notapplicable
Magnetic Support with Articulated Arm, H = 310 mm
Magnetic Support with Articulated Arm, H = 310 mm
ID: 01639061
Prijs:  CHF 323,00
Beknopt overzicht: 

Magnetic support with articulated arm and switch to disengage the magnet. Height: 310 mm
Out of stock
CLINOBEVEL 3 Inclinometer, 1°
CLINOBEVEL 3 Inclinometer, 1°
ID: 05330214
Prijs:  CHF 12.179,65
Beknopt overzicht: 

Compact, lightweight, and robust inclinometer for a wide range of applications (e.g. straightness, flatness controls, perpendicularity measurements). Resolution: 0.001 mm / Measuring range up to ± 1°
Out of stock
Accessory Set, 4 elements
Accessory Set, 4 elements
ID: 00760232
Prijs: 
Beknopt overzicht: 

Set of basic accessories allowing to start measurement with a height gauge serenely.
Out of stock
TESA-Hite Magna, 700 mm
TESA-Hite Magna, 700 mm
ID: 00730083
Prijs: 
Beknopt overzicht: 

Typical 1D manual height gauge integrating essential functions required for on-the-fly measurements and instant access to results. Measuring Range: 715 mm / 28 in
Out of stock
Magnetic Cubic Positioning Targets D1 = 6 mm (8 pc.)
Magnetic Cubic Positioning Targets D1 = 6 mm (8 pc.)
ID: B841-1A-07-A
Prijs:  CHF 194,35
Beknopt overzicht: 

Magnetic, retro-reflective non-coded targets for magnetic adhering to the workpiece. Inner diameter: 6 mm,  outer diameter: 10 mm. Quantity: 8 pcs.
  • Codering:  Ongecodeerd
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  6
  • Diameter (D2):  10
  • Bevestiging:  Magnetisch (M)
Out of stock
Ceramic Calibration Sphere (D = 15.875 mm)
Ceramic Calibration Sphere (D = 15.875 mm)
ID: G39002200
Prijs:  CHF 462,00
Beknopt overzicht: 

Calibration sphere (Ø15.875 mm) made out of ceramic with M8 thread for use of CMMs.
Out of stock
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
ID: TEST-CLONE
Prijs: 
Beknopt overzicht:  Angled probe (60°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
Out of stock
Dial Gauge (Digital / Analogue)
Dial Gauge (Digital / Analogue)
ID: 6458
Prijs:  CHF 570,00
Beknopt overzicht: 

Dial gauge with housing Ø44 mm display with reading 0.25 - 0 - 0.25 mm. Protection class IP65. Resolution: 0.001 mm / .00005"  / Measuring range: ± 0.25 mm / ± .010"
  • Measurement Technology:  Analogue / Digital
  • Measuring Unit:  mm / inch
  • Meetbereik:  ± 0.5 mm / ± .010"
  • Measuring Force:  0.07 N
  • Reading:  0.5 - 0 - 0.5 (mm)
Out of stock
Modular Adapter D20/D28
Modular Adapter D20/D28
ID: D20-MO-A__W__M__P
Prijs:  CHF 314,00
Beknopt overzicht: 

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.
Out of stock
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50P-A__B
Prijs:  CHF 940,00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Out of stock
Cylindrical Shaft for Tool Holder
Cylindrical Shaft for Tool Holder
ID: D20-D20-L60-SW15-B
Prijs:  CHF 212,00
Out of stock
Cylindrical Shaft for Tool Holder
Cylindrical Shaft for Tool Holder
ID: D20-D8-L25-B
Prijs:  CHF 123,00
Out of stock
Taper Shank DIN 2080 SK50
Taper Shank DIN 2080 SK50
ID: D28-SK50__2080-A__B
Prijs:  CHF 380,00
Beknopt overzicht: 

Taper shank DIN 2080 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Out of stock