text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: M00-694-244-000
Prijs:  zł 1.737,00
Beknopt overzicht:  Rotatable, aluminium/Dispal® stylus clamping for scanning probes HP-S-X1C/H (1x M3)
  • Bijbehorende Taster:  HP-S-X1C, HP-S-X1H
  • Vrouwelijke schroefdraad (C):  M3
  • Materiaal:  Aluminium / Dispal®
  • Lengte (L):  22
Levertijd 10-15 dagen
ID: FV-FEMALE
Prijs:  zł 142,00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-VEETWIN
Prijs:  zł 202,00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SOSUP
Prijs:  zł 77,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lengte:  6
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200P
Prijs:  zł 2.408,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-BP200/200P
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-MALE
Prijs:  zł 103,00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  zł 65,00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  zł 3.999,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  zł 4.042,00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: D28-BT40-A__B
Prijs:  zł 1.058,00
Beknopt overzicht: 

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

  • Onderdeelnummer:  D28-BT40-A/B
Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK100A-M
Prijs:  zł 1.828,00
Beknopt overzicht: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-BT40-W
Prijs:  zł 1.157,00
Beknopt overzicht: 

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK40E-B
Prijs:  zł 1.105,00
Beknopt overzicht: 

Hollow taper shank HSK40 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK40A-TI-B
Prijs:  zł 7.611,00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D16-D6-L15-B
Prijs:  zł 1.011,00
Op voorraad – Verzendtijd 1-2 dagen
ID: D16-HSK32E-B
Prijs:  zł 1.299,00
Beknopt overzicht: 

Hollow taper shank HSK32 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK25E-B
Prijs:  zł 1.441,00
Beknopt overzicht: 

Hollow taper shank HSK25 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK32-B
Prijs:  zł 1.552,00
Beknopt overzicht: 

Hollow taper shank HSK32 for use with of Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C5-B
Prijs:  zł 3.741,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: AZ-04__17
Prijs:  zł 1.075,00
Beknopt overzicht: 

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with SK/CAT40 taper shank.

Op voorraad – Verzendtijd 1-2 dagen