text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-ANGSLIDER
Prijs:  €21.00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__PIN
Prijs:  €18.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CNRBRKT
Prijs:  €50.00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-POST
Prijs:  €18.00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200F
Prijs:  €580.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDER
Prijs:  €17.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  €17.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  €15.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  €900.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  €910.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-B
Prijs:  €291.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK50-A__B
Prijs:  €246.00
Beknopt overzicht: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-W
Prijs:  €269.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-A
Prijs:  €380.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.

Op voorraad – Verzendtijd 1-2 dagen
ID: ART109451
Prijs:  €1,110.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  10
  • Bevestiging:  Magnetisch (M)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART107138
Prijs:  €96.00
Beknopt overzicht:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=5 mm and D2=10 mm. For permanently adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Diameter (D2):  10
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART107146
Prijs:  €640.00
Beknopt overzicht:  Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. Easily removable after adhering to the workpiece.
  • Codering:  Ongecodeerd
  • Reflectortype:  Witte spot
  • Diameter (D1):  20
  • Diameter (D2):  27
  • Bevestiging:  Afneembaar (R)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART111281
Prijs:  €290.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Witte spot
  • Diameter (D1):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART111173
Prijs:  €590.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  5
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART110569
Prijs:  €1,440.00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
  • Codering:  14 bit
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
  • Bevestiging:  Permanent (P)
Op voorraad – Verzendtijd 1-2 dagen