Catalogus

Magnetic, non-coded positioning targets for magnetic adhering on the surface of workpiece to do scanning job. Inner diameter: 6 mm, outer diameter: 10 mm. Quantity: 500 pcs.

Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm.

Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm,  outer diameter: 7 mm. Quantity: 1000 pcs.

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with SK/CAT40 taper shank.

Pull stud with integrated mechanism for activating Hexagon machine tool probes equipped with SK40 or CAT40 taper shanks.

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Thermal insulated hollow taper shank HSK32 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Next Jogbox (NJB) Kit including cradle and cable (4 m).

Next Jogbox (NJB) Kit including cradle and cable (6 m).

Next Jogbox (NJB) Kit including cradle and cable (15 m).

Hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Thermal insulated hollow taper shank HSK32 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

Thermal insulated hollow taper shank HSK50 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"