text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-CNRBRKT
Prijs:  zł224.00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-VEE
Prijs:  zł138.00
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-POST
Prijs:  zł82.00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BASIC__KIT
Prijs:  zł2,043.00
Beknopt overzicht:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200F
Prijs:  zł2,580.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-ARM
Prijs:  zł611.00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDER
Prijs:  zł77.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  zł77.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  zł198.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  zł65.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  zł3,999.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  zł4,042.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__400
Prijs:  zł3,999.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CTSML
Prijs:  CHF33.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SPRING
Prijs:  CHF50.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-THUMB
Prijs:  CHF10.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO16__20
Prijs:  CHF18.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  16
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PR30HINGE
Prijs:  zł361.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CTMED
Prijs:  zł142.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__300
Prijs:  zł3,354.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen