Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
D2-Stylus (SN-1.5-TC-1.2/2-L22) - Stepped
ID:
M00-694-078-000
testing
€120.00
Prijzen zijn alleen geldig voor bestellingen geplaatst via de webshop
Op voorraad – Verzendtijd 1-2 dagen
Beknopt overzicht
Straight stylus with Ø2 mm, silicon nitride ball Ø1.5 mm, stepped tungsten carbide stem Ø1.2/2 mm, length 22 mm. For use on coordinate measuring machines (CMM).
Toegevoegd aan uw winkelwagen.
The stylus is an important part of the measuring system. During the measurement, the stylus is in direct contact with the part.
Straight styli are the most common type used in the metrology industry. Depending on the application, different materials for stems and tips are available.
Silicon nitride styli tips have similar material properties to ruby whilst being more wear-resistant. Silicon nitride does not tend to form material build-up while scanning. Because of this, it is recommended for measurements on aluminium parts.
A tungsten carbide stem has high stiffness and less thermal expansion, compared to stainless steel.
| Apparaat | CMM |
|---|---|
| Schroefdraad | D2 |
| Kogel materiaal | Siliciumnitride |
| Kogel diameter (D) | 1,5 mm |
| Kwaliteit Kogel | G5 |
| Lengte (L) | 22 mm |
| Eff. Werk lengte (EWL) | 9,6 mm |
| Schacht materiaal | Wolfraamcarbide |
| Schacht diameter (S) | 1,2 / 2,0 mm |
| Gewicht | 0,7 g |