text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. Bewerkingsmachine

Bewerkingsmachine

BS-Square Stylus (TC-10x10x5-TC-3.5-L46)
BS-Square Stylus (TC-10x10x5-TC-3.5-L46)
ID: H00027361
Prijs:  CHF 188,00
Beknopt overzicht:  Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm, stainless steel stem, length 46 mm. For tool measurement on turning machines. Previous part number: 21.00-WM46
In Stock
Polygon Tool Holder C6
Polygon Tool Holder C6
ID: D28-C6-W
Prijs:  CHF 630,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
In Stock
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Prijs:  CHF 224,00
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
  • Onderdeelnummer:  D28-SK__CAT40-A/B
In Stock
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D20-HSK63F-B
Prijs:  CHF 570,00
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.
In Stock
Hollow Taper Shank HSK63 Form E
Hollow Taper Shank HSK63 Form E
ID: D28-HSK63E-B
Prijs:  CHF 380,00
Beknopt overzicht: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
In Stock
Calibration Pin (D = 5 mm)
Calibration Pin (D = 5 mm)
ID: 5209
Prijs:  CHF 100,00
Beknopt overzicht:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diameter:  5
  • Lengte:  120
  • Toepassing:  Laser Tool Setter Calibration
  • Materiaal:  Steel, hardened
In Stock
Battery (3.6 V / 1/2AA)
Battery (3.6 V / 1/2AA)
ID: 4316
Prijs:  CHF 6,00
Beknopt overzicht:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Grootte:  1/2 AA
  • Voltage:  3.6
  • Capacity:  1200
  • Compatibiliteit:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
In Stock
Tool Box 35.70-TB
Tool Box 35.70-TB
ID: 35.70-TB
Prijs:  CHF 76,00
Beknopt overzicht:  Tool kit for installation and maintenance of Infrared Tool Setter IRT35.70. Tool box contents see description.
  • Compatibiliteit:  IRT35.70
In Stock
T-Nut 14 mm
T-Nut 14 mm
ID: 4274
Prijs:  CHF 7,00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiaal:  Tempered Steel
  • Internal Thread:  M12
  • Nominale T-groefmaat:  14
In Stock
M8-Extension for Calibration Set (D = 25 mm)
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  CHF 49,00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diameter:  25
  • Lengte:  75
  • Materiaal:  Roestvast staal
In Stock
Calibration Ball Set 4  
Calibration Ball Set 4  
ID: 3D-FI EICHKUGEL SET4
Prijs:  CHF 1.130,00
Beknopt overzicht:  Calibration set for magnetic mounting on the machine tool table. For contents, see producct description.
  • Mounting:  Magnetic Mounting
  • Sphere Diameter:  10
In Stock
Battery (3 V / CR2032)
Battery (3 V / CR2032)
ID: 5309
Prijs:  CHF 4,00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Grootte:  9 V Block
  • Voltage:  9
  • Capacity:  1200
  • Compatibiliteit:  IRP40.50
In Stock
Screw plug for cross adapter 41.00-KA
Screw plug for cross adapter 41.00-KA
ID: 41.00-KA-V
Prijs:  CHF 37,00
Beknopt overzicht:  Screw plug for measuring unit cross adapter 41.00-KA. For use on machine tools.
  • Materiaal:  Plastics
  • External Thread:  M16x1
In Stock
Cross Adapter 41.00-KA
Cross Adapter 41.00-KA
ID: 41.00-KA
Prijs:  CHF 550,00
Beknopt overzicht:  Cross adapter for the connection of up to 5 measuring units to one machine tool probe.
  • Materiaal:  Aluminium
  • Compatibiliteit:  PP21.00, PP41.00
  • Internal Thread:  5x M16x1
  • External Thread:  M16x1
In Stock
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prijs:  CHF 356,00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiaal:  Koolstofvezel
  • Lengte:  200
  • Diameter:  25
  • External Thread:  M16x1
In Stock
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prijs:  CHF 486,00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lengte:  150
  • Diameter:  25
  • External Thread:  M16x1
In Stock
T-Nut 22 mm
T-Nut 22 mm
ID: 4411
Prijs:  CHF 27,00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
In Stock
T-Nut 12 mm
T-Nut 12 mm
ID: 4418
Prijs:  CHF 6,00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
In Stock
Calibration Ball Set 5  
Calibration Ball Set 5  
ID: 3D-FI EICHKUGEL SET5
Prijs:  CHF 1.930,00
Beknopt overzicht:  Calibration set for use on machine tools. For contents, see description.
In Stock
Tool Box 40.02-TB
Tool Box 40.02-TB
ID: 40.02-TB
Prijs:  CHF 32,00
Beknopt overzicht:  Tool kit for installation and maintenance of Infrared Touch Probe IRP40.02. Tool box contents see description.
In Stock