Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Preis:  CHF22.00
Schnellübersicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Auf Lager – Versand 1–2 Tage
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Preis:  CHF930.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Auf Lager – Versand 1–2 Tage
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Preis:  CHF940.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Preis:  CHF930.00
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Preis:  CHF33.00
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Vee Locator
Vee Locator
ID: FV-FEMALE
Preis:  CHF33.00
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Auf Lager – Versand 1–2 Tage
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Preis:  202,00 zł
Schnellübersicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Auf Lager – Versand 1–2 Tage
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Preis:  101 716,00 zł
Schnellübersicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
Auf Lager – Versand 1–2 Tage
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Preis:  3 879,00 zł
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  6 034,00 zł
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Auf Lager – Versand 1–2 Tage
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Preis:  13 361,00 zł
Schnellübersicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Preis:  299 545,00 zł
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Auf Lager – Versand 1–2 Tage
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Preis:  13 361,00 zł
Schnellübersicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Auf Lager – Versand 1–2 Tage
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Preis:  13 792,00 zł
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  10
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Preis:  18 102,00 zł
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  20
  • Diameter:  16
Auf Lager – Versand 1–2 Tage
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Preis:  417 208,00 zł
Schnellübersicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Auf Lager – Versand 1–2 Tage
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Preis:  3 879,00 zł
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  25
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Preis:  743 906,00 zł
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Auf Lager – Versand 1–2 Tage
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Preis:  3 879,00 zł
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  15
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Preis:  £16.00
Schnellübersicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Schroefdraad:  M8
Auf Lager – Versand 1–2 Tage