text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-SO__MAG
Prijs:  zł8,189.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  zł21,981.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  zł7,327.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  zł442,206.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  zł446,947.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK__CAT40-A__B
Prijs:  zł109,905.00
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-B
Prijs:  zł143,092.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK63F-B
Prijs:  zł181,451.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK80A-B
Prijs:  zł265,496.00
Beknopt overzicht: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK80A-M
Prijs:  zł383,159.00
Beknopt overzicht: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK50-A__B
Prijs:  zł120,680.00
Beknopt overzicht: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK__CAT40-W
Prijs:  zł109,905.00
Beknopt overzicht: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-W
Prijs:  zł132,317.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-A
Prijs:  zł186,623.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-C6-W
Prijs:  zł309,458.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C6-B
Prijs:  zł422,380.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK32E-TI-B
Prijs:  zł663,309.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK32 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C4-B
Prijs:  zł388,331.00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK50E-TI-B
Prijs:  zł751,664.00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK50 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK63F-B
Prijs:  zł280,150.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen