text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prezzo:  7.475,00 CHF
Breve panoramica:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  540,00 CHF
Breve panoramica:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  466,00 CHF
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
In giacenza - Spedizione in 1-2 giorni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  19,00 CHF
Breve panoramica:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  13,00 CHF
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10mm
  • Diametro:  8mm
In giacenza - Spedizione in 1-2 giorni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  49,00 CHF
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prezzo:  15,00 CHF
Breve panoramica:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  337,00 CHF
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  15,00 CHF
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  44,00 CHF
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  890,00 CHF
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
In giacenza - Spedizione in 1-2 giorni
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prezzo:  91,00 CHF
Breve panoramica:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  884,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  31,00 CHF
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  42,00 CHF
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  48,00 CHF
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  £14.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  16mm
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  £41.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  30,80 £
Breve panoramica:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  696,96 £
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni