text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

169 prodotto/i trovato/i

ID: FV-CONE

Prezzo: 65,00 zł

Breve panoramica: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Filetto / Collegamento: M4

Disponibile

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 3.999,00 zł

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio (G): M3

Disponibile

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prezzo: 4.042,00 zł

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio: M4 / M8

Disponibile

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prezzo: 3.999,00 zł

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetto / Collegamento: M8

Disponibile

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prezzo: 142,00 zł

Breve panoramica: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Disponibile

Vee Block Twin

ID: FV-VEETWIN

Prezzo: 202,00 zł

Breve panoramica: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Disponibile

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prezzo: 43,00 zł

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 20
Diametro: 8

Disponibile

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prezzo: 77,00 zł

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 20
Diametro: 16

Disponibile

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prezzo: 361,00 zł

Breve panoramica: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Disponibile

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prezzo: 142,00 zł

Breve panoramica: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Disponibile

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prezzo: 3.354,00 zł

Filetto / Collegamento: M8

Disponibile

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prezzo: 112,00 zł

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 100
Diametro: 16

Disponibile

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prezzo: 142,00 zł

Breve panoramica: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Disponibile

Pillar 30x30x150mm

ID: FX-PR30__150

Prezzo: 185,00 zł

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 150

Disponibile

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Prezzo: 43,00 zł

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.