text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogo
  3. Macchina utensile

Macchina utensile

LS-C-5.8 Carrying Case
LS-C-5.8 Carrying Case
ID: LS-C-5.8-CASE
Prijs: 
Beknopt overzicht:  Carrying case for storage and transport of the Hexagon LS-C-5.8 Laser Scanner Systems for machine tools.
  • Dimensione:  464 x 363 x 176 mm
  • Materiale:  Plastics
  • Compatibilità:  LS-C-5.8
Op voorraad – Verzendtijd 1-2 dagen
Calibration Ball Set 1
Calibration Ball Set 1
ID: 3D-FI EICHKUGEL SET1
Prijs:  €787.00
Beknopt overzicht:  Calibration set for magentic mounting on machine tool tables. Content see product description.
  • Mounting:  Magnetic Mounting
  • Sphere Diameter:  30mm
Op voorraad – Verzendtijd 1-2 dagen
M4-Stylus (SN-2-TC-1.5-L19)
M4-Stylus (SN-2-TC-1.5-L19)
ID: H00027433
Prijs: 
  • Previous Part Number:  91.00-T20/2-HM-M4-SI
  • Filetto / Collegamento:  M4
  • Materiale punta:  Nitruro di silicio
  • Diametro punta (D):  2mm
  • Lunghezza (L):  19mm
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Prijs:  €570.00
Beknopt overzicht: 

Short description Text
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank ANSI B5.50/CAT50
Taper Shank ANSI B5.50/CAT50
ID: D28-CAT50-W
Prijs:  €257.00
Beknopt overzicht: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Taper Shank JIS BT50
Taper Shank JIS BT50
ID: D28-BT50-W
Prijs:  €269.00
Beknopt overzicht: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Op voorraad – Verzendtijd 1-2 dagen
Extension for 3D-FI Calibration Ball
Extension for 3D-FI Calibration Ball
ID: 3D-FI Extension 45
Prijs:  €95.00
Beknopt overzicht:  Extension with 45° angle for calibration balls for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 5 mm)
Calibration Pin (D = 5 mm)
ID: 5209
Prijs:  €114.00
Beknopt overzicht:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diametro:  5mm
  • Lunghezza:  120mm
  • Applicazione:  Laser Tool Setter Calibration
  • Materiale:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 10 mm)
Calibration Pin (D = 10 mm)
ID: 4286
Prijs:  €123.00
Beknopt overzicht:  Calibration pin (D = 10 mm). For use on machine tools.
  • Diametro:  10mm
  • Lunghezza:  120mm
  • Applicazione:  Laser Tool Setter Calibration
  • Materiale:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
Battery (3.6 V / 1/2AA)
Battery (3.6 V / 1/2AA)
ID: 4316
Prijs:  €7.00
Beknopt overzicht:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Dimensione:  1/2 AA
  • Tensione:  3,6V
  • Capacity:  1.200mAh
  • Compatibilità:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 14 mm
T-Nut 14 mm
ID: 4274
Prijs:  €7.00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiale:  Tempered Steel
  • Internal Thread:  M12
  • Valore nominale scanalatura a T:  14mm
Op voorraad – Verzendtijd 1-2 dagen
M8-Extension for Calibration Set (D = 25 mm)
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  €56.00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diametro:  25mm
  • Lunghezza:  75mm
  • Materiale:  Acciaio inossidabile
Op voorraad – Verzendtijd 1-2 dagen
Battery (3 V / CR2032)
Battery (3 V / CR2032)
ID: 5309
Prijs:  €5.00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Dimensione:  9 V Block
  • Tensione:  9V
  • Capacity:  1.200mAh
  • Compatibilità:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prijs:  €406.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiale:  Fibra di carbonio
  • Lunghezza:  200mm
  • Diametro:  25mm
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
SKU: 41.00-VE150
Price:  €554.00
Quick overview:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Lunghezza:  150mm
  • Diametro:  25mm
  • External Thread:  M16x1
Stock goods
T-Nut 22 mm
T-Nut 22 mm
SKU: 4411
Price:  €31.00
Quick overview:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Stock goods
T-Nut 12 mm
T-Nut 12 mm
SKU: 4418
Price:  €7.00
Quick overview:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Stock goods
T-Nut 18 mm
T-Nut 18 mm
SKU: 4431
Price:  €17.00
Quick overview:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Stock goods
Storage Box
Storage Box
SKU: 4301
Price:  €39.00
Quick overview:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Stock goods
Calibration Pin (D = 4 mm / D = 10 mm)
Calibration Pin (D = 4 mm / D = 10 mm)
SKU: 4420
Price:  €275.00
Quick overview:  #N/A
Stock goods