text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog

Katalog

mdTest_Course_031201
mdTest_Course_031201
ID: 152606
Cena:  431,00 zł
Szybki podgląd:  Test_summary
NIE DOTYCZY
mdTest_Course_031801
mdTest_Course_031801
ID: 152627
Cena:  431,00 zł
Szybki podgląd:  Test_summary
NIE DOTYCZY
mdtest-aravind-course-multiLanguage-01
mdtest-aravind-course-multiLanguage-01
ID: 152704
Cena:  431,00 zł
Szybki podgląd:  Test_summary
NIE DOTYCZY
mdtest-isuru-2024-05-08-1
mdtest-isuru-2024-05-08-1
ID: 152805
Cena:  431,00 zł
Szybki podgląd:  Test_summary
NIE DOTYCZY
Extension for 3D-FI Calibration Ball
Extension for 3D-FI Calibration Ball
ID: 3D-FI Extension 45
Cena:  437,00 zł
Szybki podgląd:  Extension with 45° angle for calibration balls for machine tools.
W magazynie — wysyłka 1–2 dni
M4-Stylus (SN-2-TC-1.5-L19)
M4-Stylus (SN-2-TC-1.5-L19)
ID: H00027433
Cena: 
  • Previous Part Number:  91.00-T20/2-HM-M4-SI
  • Filetto / Collegamento:  M4
  • Materiale punta:  Nitruro di silicio
  • Diametro punta (D):  2mm
  • Lunghezza (L):  19mm
W magazynie — wysyłka 1–2 dni
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
ID: G39031401
Cena:  3.352,00 zł
Szybki podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
W magazynie — wysyłka 1–2 dni
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Cena:  2.462,00 zł
Szybki podgląd: 

Short description Text
W magazynie — wysyłka 1–2 dni
Taper Shank ANSI B5.50/CAT50
Taper Shank ANSI B5.50/CAT50
ID: D28-CAT50-W
Cena:  1.110,00 zł
Szybki podgląd: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
W magazynie — wysyłka 1–2 dni
Taper Shank JIS BT50
Taper Shank JIS BT50
ID: D28-BT50-W
Cena:  1.162,00 zł
Szybki podgląd: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
W magazynie — wysyłka 1–2 dni
Hexagon site Training - PC-DMIS advanced GD&T
Hexagon site Training - PC-DMIS advanced GD&T
ID: HN61-A008-118
Cena: 
Szybki podgląd: 

Classroom Training for PC-DMIS Advanced Training - PC-DMIS GD&T - 2 days

Course summary/agenda:

The PC-DMIS Advanced GD&T course is targeted at individuals who have completed the PC-DMIS Level 1 course and wish to enhance their understanding of GD&T and how to implement that correctly in PC-DMIS. All GD&T types will be covered with practical examples throughout to aid learning. The course will provide a platform for trainees to create reports that follow the latest metrology standards, ensuring their workplace quality processes are based upon correct metrology data.
  • Course Level:  Level 2
NIE DOTYCZY
Customer onsite Training - Dedicated- PC-DMIS Advanced Training - PC-DMIS GD&T
Customer onsite Training - Dedicated- PC-DMIS Advanced Training - PC-DMIS GD&T
ID: HN61-A008-169
Cena: 
Szybki podgląd: 

Classroom Training for PC-DMIS Advanced Training - PC-DMIS GD&T - 2 days

Course summary/agenda:

The PC-DMIS Advanced GD&T course is targeted at individuals who have completed the PC-DMIS Level 1 course and wish to enhance their understanding of GD&T and how to implement that correctly in PC-DMIS. All GD&T types will be covered with practical examples throughout to aid learning. The course will provide a platform for trainees to create reports that follow the latest metrology standards, ensuring their workplace quality processes are based upon correct metrology data.
  • Course Level:  Level 2
  • Periodo:  22/05/2025 - 31/05/2025 
  • Data d'inizio:  22/05/2025
NIE DOTYCZY
Classroom Training - PC-DMIS Portable basic - 3 days
Classroom Training - PC-DMIS Portable basic - 3 days
ID: RE54T153-00060
Cena: 
Szybki podgląd: 

Target Group

New users of portable equipment with PC-DMIS, as well as those who wish to strengthen their basic knowledge in the PC-DMIS software.

Course Goals

To provide the basic knowledge required to use PC-DMIS with portable equipment.

Prerequisites

Computer literacy and basic knowledge in reading technical drawings.

Additional Information

Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
NIE DOTYCZY
Classroom Training - PC-DMIS Portable laserscanning - 1 day
Classroom Training - PC-DMIS Portable laserscanning - 1 day
ID: RE54T153-00055
Cena: 
Szybki podgląd: 

Target Group
New users of measuring arms with PC-DMIS Laser, as well as those who wish to strengthen their basic knowledge in laser scanning.
Course Goals
To provide the basic knowledge required to use laser scanning with the measuring arm in the PC-DMIS software.
Prerequisites
Computer literacy, basic knowledge in reading technical drawings, and basic knowledge of PC-DMIS Measuring Arm.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
NIE DOTYCZY
Classroom Training - Drawings Basic - 1 day
Classroom Training - Drawings Basic - 1 day
ID: RE54T153-00005
Cena: 
Szybki podgląd: 

Target Group
Individuals who need basic knowledge in reading technical drawings.
Course Goals
To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 
NIE DOTYCZY
Classroom Training - Workshop measurement - 2 days
Classroom Training - Workshop measurement - 2 days
ID: RE54T153-00007
Cena:  324 974,00 zł
Szybki podgląd: 

Target Group
Anyone who needs basic knowledge in measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals
To provide basic knowledge to build upon in the field of workshop metrology.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 
NIE DOTYCZY
Classroom Training - Workshop measurement and drawings, basic - 3 days
Classroom Training - Workshop measurement and drawings, basic - 3 days
ID: RE54T153-00004
Cena:  487 892,00 zł
Szybki podgląd: 

Target Group
Anyone who needs basic knowledge in reading technical drawings and measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals
To provide basic knowledge to build upon in the areas of reading technical drawings and workshop metrology.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

 

 
NIE DOTYCZY
Blended Training, web & Classroom - GD&T CMM - 1,5 + 3 days
Blended Training, web & Classroom - GD&T CMM - 1,5 + 3 days
ID: RE54T153-00033
Cena:  774 938,00 zł
Szybki podgląd: 

Target Group
Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals
To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites
Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information
To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
NIE DOTYCZY
Heavy-duty 5 Pallet Storage Solution 500 x 750 mm
Heavy-duty 5 Pallet Storage Solution 500 x 750 mm
ID: GB0119-2003
Cena: 
Szybki podgląd: 

The heavy-duty 5 Pallet Storage bench is purpose-built to work seamlessly with the transport trolley and 500 x 750 mm baseplates.
  • Pallet System Compatibility:  Heavy-duty Manual Pallet System 500 x 750mm (GB0119-2000)
  • Trolley Compatibility:  Heavy-duty Trolley System 500 x 750 mm (GB0119-2001)
NIE DOTYCZY
Classroom Training - PC-DMIS CMM basic - 4 days
Classroom Training - PC-DMIS CMM basic - 4 days
ID: RE54T153-00010
Cena:  752 526,00 zł
Szybki podgląd: 

Target Group

Measuring machine operators and measuring machine programmers, as well as those who wish to strengthen their basic knowledge in the PC-DMIS software.

Course Goals

To provide the basic knowledge required to start using PC-DMIS.

Prerequisites

Computer literacy and basic knowledge in reading technical drawings.

Additional Information

Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com
NIE DOTYCZY