text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

154 product(en) gevonden

ID: GB-0122-1000

Prijs: 7.475,00 CHF

Beknopt overzicht: SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.

Compatibilità: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: 540,00 CHF

Beknopt overzicht: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Compatibilità: HP-S-X1 Stylus Clampings
Diametro: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: 466,00 CHF

Beknopt overzicht: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Compatibilità: HP-S-X3 Stylus Clampings
Diametro: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Prijs:

Beknopt overzicht:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Op voorraad – Verzendtijd 1-2 dagen

Vee Locator

ID: FV-FEMALE

Prijs: 25,00 CHF

Beknopt overzicht: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: 42,00 CHF

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Prijs: 236,00 CHF

Beknopt overzicht: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Compatibilità piastra di fissaggio: FV-200-200C, FV-200/200F, FV-200/200P

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: 9,00 CHF

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 20mm
Diametro: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prijs: 31,00 CHF

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prijs: 695,00 CHF

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prijs: 31,00 CHF

Beknopt overzicht: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Op voorraad – Verzendtijd 1-2 dagen

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Prijs: 32,00 CHF

Beknopt overzicht: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lunghezza: 10mm
Diametro: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Prijs: 42,00 CHF

Beknopt overzicht: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lunghezza: 20mm
Diametro: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Standoff Adjustable (M8)

ID: FX-HEIGHT

Prijs: 59,00 CHF

Beknopt overzicht: The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.

Lunghezza: 50mm
Diametro: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 400x600x12mm (M8)

ID: FX-BP400__600

Prijs: 1.726,00 CHF

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Centering Pin

ID: FV-MALE

Prijs: 20,00 CHF

Beknopt overzicht: Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.

Filetto / Collegamento: M4

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Prijs: 1.800,00 CHF

Beknopt overzicht: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Filetto / Collegamento: M4
Applicazione: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Prijs: CHF11.50

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 15mm
Diametro: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Cap Screw Set M8 (L = 16 mm)

ID: FX-CAPM8__16

Prijs: CHF21.85

Beknopt overzicht: Cap screws are used to mount Swift-Fix components on the base plate.

Filetto / Collegamento: M8

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Full Kit

ID: FV-FULLKIT

Prijs: CHF2,773.80

Beknopt overzicht: With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Filetto / Collegamento: M4
Applicazione: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Toegevoegd aan uw winkelwagen.

Previous
1(current)
2
3
4
5
Next

Productbeschikbaarheid per winkellocatie

Uren

CMM

Filters