text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prijs:  7.475,00 CHF
Beknopt overzicht:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  540,00 CHF
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  466,00 CHF
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  884,00 CHF
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  31,00 CHF
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  25,00 CHF
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  42,00 CHF
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  236,00 CHF
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  9,00 CHF
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  14,00 CHF
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  31,00 CHF
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  zł299,545.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  zł13,361.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  zł13,792.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  10mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  zł18,102.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  20mm
  • Diametro:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  zł417,208.00
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Op voorraad – Verzendtijd 1-2 dagen
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prijs:  zł17,671.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 150mm
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  zł3,879.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  25mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prijs:  zł10,775.00
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetto / Collegamento:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  zł6,034.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  6mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen