text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

Catalogo

1.319 prodotto/i trovato/i

ID: FX-UNI__JOINT

Prezzo: 84,00 £

Breve panoramica: Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Vee Locator

ID: FX-VEE

Prezzo: 68,00 £

Breve panoramica: The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Standoff Magnet (D = 16 mm / L = 20 mm)

ID: FX-SO__MAG

Prezzo: 19,00 £

Breve panoramica: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Lunghezza: 20
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Pillar Base Plate

ID: FX-PR30PLATE

Prezzo: 44,00 £

Breve panoramica: The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.

Dimensione: 130 x 30 mm

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x100mm

ID: FX-PR30__100

Prezzo: 35,00 £

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 100

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x250mm

ID: FX-PR30__250

Prezzo: 44,00 £

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 250

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x50mm

ID: FX-PR30__50

Prezzo: 34,00 £

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 50

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 30 mm)

ID: FX-SO16__30

Prezzo: 15,00 £

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lunghezza: 30
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Standoff Pin M8 (D= 16 mm/L= 20 mm)

ID: FX-SO__PIN

Prezzo: 19,00 £

Breve panoramica: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Lunghezza: 25
Diametro: 16

In giacenza - Spedizione in 1-2 giorni

Slider Block (M8)

ID: FX-SLIDER

Prezzo: 23,00 £

Breve panoramica: A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.

Filetto / Collegamento: M8

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x200mm

ID: FX-PR30__200

Prezzo: 41,00 £

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Dimensione: 30 x 30 x 200

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 818,00 £

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diametro esterno griffe (D1): 70
Campo di serraggio esterno (A): 1 - 71
Campo di serraggio interno (I): 18 - 66
Materiale: Acciaio inossidabile
Serrraggio (G): M3

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prezzo: 827,00 £

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.