text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  500,00 £
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-AB190/200F
  • Filetto / Collegamento:  M4
  • Previous Part Number:  FV-AB180/200F
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  19,00 £
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  1.336,00 £
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  1.673,00 £
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  16,00 £
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10
  • Diametro:  8
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  45,00 £
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  114,00 £
Resumen:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetto / Collegamento:  M8
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  28,00 £
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  16,00 £
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  416,00 £
Resumen:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  £527.00
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  £125.00
Resumen:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetto / Collegamento:  M8
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  £15.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  £15.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10
  • Diametro:  8
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  £41.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  £14.00
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  £818.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  £827.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Precio:  £736.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Compatibilità piastra di fissaggio:  KB-400/400, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  £1,055.00
Resumen:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Existencias disponibles - Envío en 1-2 días