text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prijs:  2.801.500,00 zł
Beknopt overzicht:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilità:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  2 430,00 zł
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X1 Stylus Clampings
  • Diametro:  60mm
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  2 097,00 zł
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilità:  HP-S-X3 Stylus Clampings
  • Diametro:  40mm
Op voorraad – Verzendtijd 1-2 dagen
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  zł85.50
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  zł4,005.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  zł4,050.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  3 978,00 zł
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  £27.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  £22.00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  189,00 zł
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  1 062,00 zł
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  40,50 zł
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  63,00 zł
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  €31.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  3 846,83 £

599,00 £
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  171,59 £

27,00 £
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  177,12 £

28,00 £
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  10mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  232,47 £

35,00 $
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  20mm
  • Diametro:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  901,00 $
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  £8.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  25mm
  • Diametro:  8mm
Op voorraad – Verzendtijd 1-2 dagen