text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

Jogbox (NJB) without Cable
Jogbox (NJB) without Cable
ID: H009834
Prezzo:  5.169,00 zł
Breve panoramica: 

Next Jogbox (NJB) without cable.
Tempi di consegna più lunghi
HR-X3-P Stylus Changer Port
HR-X3-P Stylus Changer Port
ID: M00-114-109-000
Prezzo:  705,00 zł
Breve panoramica:  Stylus changer port for HP-S-X3
  • Previous Part Number:  03939171
  • Sensore compatibile:  HP-S-X3
Disponibile
HR-X1-3P Stylus Changer Ports
HR-X1-3P Stylus Changer Ports
ID: M00-114-213-000
Prezzo:  1.178,00 zł
Breve panoramica:  Triple stylus changer port for scanning sensor HP-S-X1S.
  • Sensore compatibile:  HP-S-X1S
Disponibile
HR-X1-P-SF Stylus Changer Port
HR-X1-P-SF Stylus Changer Port
ID: M00-114-167-000
Prezzo:  1.634,00 zł
Breve panoramica:  Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Sensore compatibile:  HP-S-X1S, HP-S-X1H, HP-S-X1C
Disponibile
HA-M-50 Probe Extension M8 (L = 50 mm)
HA-M-50 Probe Extension M8 (L = 50 mm)
ID: 03969065
Prezzo:  972,00 zł
Breve panoramica:  M8/M8 extension made of aluminium with a length of 50 mm
  • Lunghezza (L):  50
  • Materiale:  Alluminio
Disponibile
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  3.999,00 zł
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Disponibile
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  4.042,00 zł
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Disponibile
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  215,00 zł
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Disponibile
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  43,00 zł
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetto / Collegamento:  M8
Disponibile
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  77,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  16
Disponibile
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  361,00 zł
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Disponibile
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  112,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100
  • Diametro:  16
Disponibile
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  258,00 zł
Breve panoramica:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Dimensione:  120 x 45 x 12 mm
Disponibile
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  5.160,00 zł
Breve panoramica:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
Disponibile
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  374,00 zł
Breve panoramica:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetto / Collegamento:  M8
Disponibile
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  185,00 zł
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 150
Disponibile
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prezzo:  116,00 zł
Breve panoramica:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetto / Collegamento:  M8
Disponibile
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Prezzo:  77,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  20
Disponibile
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Prezzo:  112,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  100
  • Diametro:  20
Disponibile
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Prezzo:  116,00 zł
Breve panoramica:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Disponibile