text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Katalógus
  3. CMM
  4. Befogók

Befogók

Vee Locator
Vee Locator
Azonosító: FV-FEMALE
Ár:  33,00 CHF
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Raktáron - Kiszállítás 1-2 napon belül
Cone Adjustable (M4)
Cone Adjustable (M4)
Azonosító: FV-CONEADJ
Ár:  22,00 CHF
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Azonosító: FV-BP200__200P
Ár:  560,00 CHF
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200C
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Azonosító: FV-BP200__200C
Ár:  570,00 CHF
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-AB190/200F
  • Filetto / Collegamento:  M4
  • Previous Part Number:  FV-AB180/200F
Raktáron - Kiszállítás 1-2 napon belül
Angle Block Slider (M4)
Angle Block Slider (M4)
Azonosító: FV-ANGSLIDER
Ár:  22,00 CHF
Gyors áttekintés:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Corner Bracket
Corner Bracket
Azonosító: FV-CNRBRKT
Ár:  52,00 CHF
Gyors áttekintés:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Azonosító: FV-BP200__200F
Ár:  600,00 CHF
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M4)
Resting Cone (M4)
Azonosító: FV-CONE
Ár:  9,00 $
Gyors áttekintés:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
Azonosító: FC-70SS3-NF
Ár:  930,00 $
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
Azonosító: FC-70SS3
Ár:  940,00 $
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
Azonosító: FX-BP300__400
Ár:  794,00 $
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  28,00 $
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  32,00 $
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Raktáron - Kiszállítás 1-2 napon belül
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Price:  254,00 €
Quick overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilità piastra di fissaggio:  FV-200-200C, FV-200/200F, FV-200/200P
Stock goods
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Price:  10,00 €
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  8
Stock goods
Hinge Pivot With Handle
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Price:  82,00 €
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Stock goods
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
Price:  32,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Stock goods
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Price:  750,00 €
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
Stock goods
Spring Nut (M8)
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Price:  32,00 €
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Stock goods
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Price:  38,00 €
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lunghezza:  10
  • Diametro:  8
Stock goods