text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  224,00 zł
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni
Tension Post (M4)
ID: FV-POST
Prezzo:  82,00 zł
Breve panoramica:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  2.580,00 zł
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  77,00 zł
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  77,00 zł
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10
  • Diametro:  8
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M4)
ID: FV-CONE
Prezzo:  65,00 zł
Breve panoramica:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  3.999,00 zł
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  4.042,00 zł
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70
  • Campo di serraggio esterno (A):  1 - 71
  • Campo di serraggio interno (I):  18 - 66
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-B
Prezzo:  1.251,00 zł
Breve panoramica: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

In giacenza - Spedizione in 1-2 giorni
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50-A__B
Prezzo:  1.058,00 zł
Breve panoramica: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

In giacenza - Spedizione in 1-2 giorni
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-W
Prezzo:  1.157,00 zł
Breve panoramica: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

In giacenza - Spedizione in 1-2 giorni
Taper Shank DIN ISO 7388 SK30 AZ-01
ID: D28-SK30-A
Prezzo:  1.634,00 zł
Breve panoramica: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.

In giacenza - Spedizione in 1-2 giorni
Target D1=10 mm retro coded No. 2-75 (M)
ID: ART106194
Prezzo:  2.365,00 zł
Breve panoramica:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codifica:  14 Bit
  • Tipo di riflettività:  Retroriflettente
  • Diametro (D1):  10
  • Adesivo:  Magnetico (M)
In giacenza - Spedizione in 1-2 giorni
Target D1=5 mm retro uncoded (5000 pc.) (P)
ID: ART107122
Prezzo:  7.439,00 zł
Breve panoramica:  Set consisting of 5000 retroreflective uncoded measurement targets on roll. Ring diameter of D1=5 mm and D2=10 mm. For permanently adhering to the workpiece.
  • Codifica:  Non codificato
  • Tipo di riflettività:  Retroriflettente
  • Diametro (D1):  5
  • Diametro (D2):  10
  • Adesivo:  Permanente (P)
In giacenza - Spedizione in 1-2 giorni
Target D1=10 mm retro coded No. 151-500 (P)
ID: ART106160
Prezzo:  3.096,00 zł
Breve panoramica:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codifica:  14 Bit
  • Tipo di riflettività:  Retroriflettente
  • Diametro (D1):  10
  • Adesivo:  Permanente (P)
In giacenza - Spedizione in 1-2 giorni
Target D1=5 mm retro coded No. 2-150 (P)
ID: ART107108
Prezzo:  1.376,00 zł
Breve panoramica:  Set consisting of retroreflective coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codifica:  14 Bit
  • Tipo di riflettività:  Retroriflettente
  • Diametro (D1):  5
  • Adesivo:  Permanente (P)
In giacenza - Spedizione in 1-2 giorni
Target D1=10 mm retro coded No. 2-75 (P)
ID: ART107111
Prezzo:  903,00 zł
Breve panoramica:  Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codifica:  14 Bit
  • Tipo di riflettività:  Retroriflettente
  • Diametro (D1):  10
  • Adesivo:  Permanente (P)
In giacenza - Spedizione in 1-2 giorni
Target D1=5 mm white coded No. 2-150 (P)
ID: ART106154
Prezzo:  731,00 zł
Breve panoramica:  Set consisting of white coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codifica:  14 Bit
  • Tipo di riflettività:  Punto bianco
  • Diametro (D1):  5
  • Adesivo:  Permanente (P)
In giacenza - Spedizione in 1-2 giorni
Target D1=3 mm white uncoded (1000 pc.) (R)
ID: ART107134
Prezzo:  439,00 zł
Breve panoramica:  Set consisting of 1000 white uncoded measurement targets with ring diameter of D1=3 mm and D2=5 mm. Easily removable after adhering to the workpiece.
  • Codifica:  Non codificato
  • Tipo di riflettività:  Punto bianco
  • Diametro (D1):  3
  • Diametro (D2):  5
  • Adesivo:  Removibile (R)
In giacenza - Spedizione in 1-2 giorni
Target D1=10 mm retro coded No. 76-150 (P)
ID: ART107112
Prezzo:  903,00 zł
Breve panoramica:  Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=10 mm. For permanently adhering to the workpiece.
  • Codifica:  14 Bit
  • Tipo di riflettività:  Retroriflettente
  • Diametro (D1):  10
  • Adesivo:  Permanente (P)
In giacenza - Spedizione in 1-2 giorni