text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

HR-X1-P-SF Stylus Changer Port
HR-X1-P-SF Stylus Changer Port
ID: M00-114-167-000
Prezzo:  380,00 CHF
Breve panoramica:  Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Sensore compatibile:  HP-S-X1S, HP-S-X1H, HP-S-X1C
In giacenza - Spedizione in 1-2 giorni
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Prezzo:  492,00 CHF
Breve panoramica: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 CHF
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  18,00 CHF
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  20
  • Diametro:  16
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  84,00 CHF
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  33,00 CHF
Breve panoramica:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  780,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prezzo:  1.010,00 CHF
Breve panoramica:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M8
  • Applicazione:  CMM, Bracci di misura portatili
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  43,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 150
In giacenza - Spedizione in 1-2 giorni
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prezzo:  27,00 CHF
Breve panoramica:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Prezzo:  22,00 CHF
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Lunghezza:  10
  • Diametro:  15
In giacenza - Spedizione in 1-2 giorni
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  62,00 CHF
Breve panoramica:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Lunghezza:  50
  • Diametro:  16
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.810,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prezzo:  18,00 CHF
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  30
  • Diametro:  20
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Prezzo:  22,00 CHF
Breve panoramica:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  49,00 CHF
Breve panoramica:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Dimensione:  130 x 30 mm
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Prezzo:  1.520,00 CHF
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetto / Collegamento:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  40,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 100
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  49,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 250
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  38,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 50
In giacenza - Spedizione in 1-2 giorni