text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo

Catálogo

Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Precio:  10,00 CHF
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  15mm
  • Diametro:  8mm
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Precio:  2.370,00 CHF
Resumen:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetto / Collegamento:  M4
  • Applicazione:  Multisensor CMM
Existencias disponibles - Envío en 1-2 días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  420,00 CHF
Resumen:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  570,00 CHF
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Codice prodotto:  FV-BP200/200C
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  22,00 CHF
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  19,00 CHF
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10mm
  • Diametro:  8mm
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  52,00 CHF
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  32,00 CHF
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  19,00 CHF
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  600,00 CHF
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  18,00 CHF
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  18,00 CHF
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10mm
  • Diametro:  8mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  46,00 CHF
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  15,00 CHF
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto / Collegamento:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  930,00 CHF
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  940,00 CHF
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  70mm
  • Campo di serraggio esterno (A):  1 - 71mm
  • Campo di serraggio interno (I):  18 - 66mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Precio:  224,00 CHF
Resumen: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK63 Form E
Hollow Taper Shank HSK63 Form E
ID: D28-HSK63E-B
Precio:  380,00 CHF
Resumen: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-B
Precio:  291,00 CHF
Resumen: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D28-HSK63F-B
Precio:  369,00 CHF
Resumen: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días